Saturn ION RedLine Forums banner

new ecotec shop

10K views 95 replies 19 participants last post by  mrbelvedere 
#1 ·
FMSR

lets see how long they last
 
#6 ·
the site is way more info then zzp on the products. looks decent. but ill hold my judgment for a lil while lol lol....
 
#14 ·
Yeah until you realize at 50 a pop that's $800 in friggin rockers
 
#20 · (Edited)
your right im thinking of their solid lash adjusters were 50ea
fmsr heads are from 950 to 9000 their bare blocks are from 1000 to 2000 it seems to be a lot of way over priced stuff given they haven't done shit to prove their parts or their worth
 
#25 ·
fmsr stg1 head 950+ 600 dollar core

FMSR Performance Stage 1 Head - "Pantera"

The FMSR Performance Stage 1 head is a mild modified stock OEM aluminum cylinder head, specifically for low boost [20 - 25PSI] turbo tunes & performance applications. This head utilizes top notch manufacture's parts and using the industry’s tightest machining tolerances for enhanced performance, exact component fit and maximum durability. ALL bolts are torque to factory specs. ALL GMPP / OEM parts are Brand New.

Core options & Charges:

FMSR Performance Heads are avaliable for all Gen I, Gen II and Gen III Ecotec blocks.

Direct core buyout is avaliable for an additional cost.

PLEASE NOTE: If you are shipping in your core to us and it is found damaged upon inspection [cracked/ chipped/ distorted] beyond repair, the core charge will be kept or charged to offset the cost of purchasing another cylinder head for your build. Shipping (to or from) is the owner's expense if the block is damaged upon inspection.

--------------------------------------------------------------------------------

Application: Direct stock replacement or built for Mild tunes & performance applications (300 - 450 WHP @93RON or e85RON)

--------------------------------------------------------------------------------

Included in the head setup:

GMPP Cams

GMPP Fuel Pump Lobe* [if applicable]

GMPP Intake Valves

GMPP Exhaust Valves

GMPP Valve Seats

GMPP Valve Guides

GMPP Followers

GMPP Lashes

Intake/Exhaust "Gasket Matched" Ports

FMSR 85lb Valve Springs

FMSR Spring Retainers (Titanium)

FMSR Seats (Titanium)

ARP Head Studs

--------------------------------------------------------------------------------

*GMPP Fuel Pump Lobe - Stock Fuel Lobe design
 
#26 ·
fmsr stg2 1450+ 600 core

FMSR Performance Stage 2 Head - "Leopardo"

The FMSR Performance Stage 2 head is a mild to moderate modified aluminum cylinder head, specifically for low - medium boost [22 - 27PSI] tunes and performance applications. This head utilizes top notch manufacture's parts and using the industry’s tightest machining tolerances for enhanced performance, exact component fit and maximum durability. ALL bolts are torque to factory specs. ALL GMPP / OEM parts are Brand New.

Core options & Charges:

FMSR Performance Heads are avaliable for all Gen I, Gen II and Gen III Ecotec blocks.

Direct core buyout is avaliable for an additional cost.

PLEASE NOTE: If you are shipping in your core to us and it is found damaged upon inspection [cracked/ chipped/ distorted] beyond repair, the core charge will be kept or charged to offset the cost of purchasing another cylinder head for your build. Shipping (to or from) is the owner's expense if the block is damaged upon inspection.

--------------------------------------------------------------------------------

Application: Direct performance replacement or built for Mild to Moderate tunes & performance applications (400 - 550 WHP @93RON or e85RON)

--------------------------------------------------------------------------------

Included in this head setup:

FMSR Stage 1 Cams

GMPP Fuel Pump Lobe* (if applicable)

GMPP Intake Valves

GMPP Exhaust Valves

GMPP Valve Seats

GMPP Valve Guides

GMPP Followers

GMPP Lashes

Intake/Exhaust "Gasket Matched" Ports

FMSR 85# Valve Springs

FMSR Spring Retainers (Titanium)

FMSR Seats (Titanium)

ARP Head Studs

--------------------------------------------------------------------------------

FMSR Stage 1 Cams Card Info: Intake: 212@ .424” & Exhaust: 206@ .420” - Lash @ 1mm

*GMPP Fuel Pump Lobe - Stock Fuel Lobe design
 
#27 ·
fmsr stg3 1850+ 600 core

FMSR Performance Stage 3 Head - "Jaguar"

The FMSR Performance Stage 3 head is a Moderate to Intense modified Ecotec aluminum cylinder head, specifically for low - medium boost [24 - 28+PSI] tunes and performance applications. This head utilizes top notch manufacture's parts and using the industry’s tightest machining tolerances for enhanced performance, exact component fit and maximum durability. ALL bolts are torque to factory specs. ALL GMPP / OEM parts are Brand New.

Core options & Charges:

FMSR Performance Heads are avaliable for all Gen I, Gen II and Gen III Ecotec blocks.

Direct core buyout is avaliable for an additional cost.

PLEASE NOTE: If you are shipping in your core to us and it is found damaged upon inspection [cracked/ chipped/ distorted] beyond repair, the core charge will be kept or charged to offset the cost of purchasing another cylinder head for your build. Shipping (to or from) is the owner's expense if the block is damaged upon inspection.

--------------------------------------------------------------------------------

Application: Direct performance replacement or built for Moderate to intense tunes & performance applications (450 - 600 WHP @98RON or e85RON)

--------------------------------------------------------------------------------

Included in this head setup:

FMSR Stage 1 Cams*

FMSR Stage 1 Fuel Lobe** [if applicable]

GMPP Intake Valves

GMPP Exhaust Valves

GMPP Valve Seats

GMPP Valve Guides

GMPP Followers

GMPP Lashes

FMSR Polished & Tuned*** (Flow Benched)

FMSR Valve Springs (options listed above)

FMSR Spring Retainers (Titanium)

FMSR Seats (Titanium)

ARP Head Studs

--------------------------------------------------------------------------------

*FMSR Stage 1 Cams Card Info: Intake: 212@ .424” & Exhaust: 206@ .420” -Lash @ 1mm

**FMSR Fuel Lobe Info: 3 Low valley design

***Ports are polished
 
#28 ·
fmsr stg4 2599+ 600 core

FMSR Performance Stage 4 Head - "Cheetah"

The FMSR Performance Stage 4 head is a Intense to Wild, modified aluminum cylinder head, specifically for medium - high boost [30 - 40+PSI] tunes and performance applications. This head utilizes top notch manufacture's parts and using the industry’s tightest machining tolerances for enhanced performance, exact component fit and maximum durability. ALL bolts are torque to factory specs. ALL GMPP / OEM parts are Brand New.

Core options & Charges:

FMSR Performance Heads are avaliable for all Gen I, Gen II and Gen III Ecotec blocks.

Direct core buyout is avaliable for an additional cost.

PLEASE NOTE: If you are shipping in your core to us and it is found damaged upon inspection [cracked/ chipped/ distorted] beyond repair, the core charge will be kept or charged to offset the cost of purchasing another cylinder head for your build. Shipping (to or from) is the owner's expense if the block is damaged upon inspection.

--------------------------------------------------------------------------------

Application: Direct performance replacement or built for Intense tunes & performance applications (500 - 675 WHP @98RON or e85RON)

--------------------------------------------------------------------------------

Included in this head setup:

FMSR Stage 1 Cams*

FMSR Stage 1 Fuel Lobe** (if applicable)

FERREA Intake Valves (.5 oversized)

FERREA Exhaust Valves (.5 oversized)

GMPP Valve Seats (3 angle regrind)

FERREA Valve Guides

GMPP Followers

GMPP Lashes

FMSR Ported / Polished & Tuned*** (Flow Benched)

FMSR Valve Springs (options listed above)

FMSR Spring Retainers (Titanium)

FMSR Seats (Titanium)

ARP Head Studs

--------------------------------------------------------------------------------

*FMSR Stage 1 Cams Card Info: Intake: 212@ .424” & Exhaust: 206@ .420” -Lash @ 1mm

**FMSR Fuel Lobe Info: 3 Mid-Deep valley design

***FMSR Head Porting Info: #2 ceiling design
 
#29 ·
fmsr stg5 6950+ 600 core

FMSR Performance Stage 5 head - "Tigre"

The FMSR Performance Stage 5 head is a Fu-kin Monster aluminum cylinder head, specifically for Crazy Ass Hi boost [40 - 50+PSI] tunes and performance applications. This head utilizes top notch manufacture's parts and using the industry’s tightest machining tolerances for enhanced performance, exact component fit and maximum durability. ALL bolts are torque to factory specs. ALL OEM parts are Brand New.

Core options & Charges:

FMSR Performance Heads are avaliable for all Gen I, Gen II and Gen III Ecotec blocks.

Direct core buyout is avaliable for an additional cost.

PLEASE NOTE: If you are shipping in your core to us and it is found damaged upon inspection [cracked/ chipped/ distorted] beyond repair, the core charge will be kept or charged to offset the cost of purchasing another cylinder head for your build. Shipping (to or from) is the owner's expense if the block is damaged upon inspection.

--------------------------------------------------------------------------------

Application: Direct performance replacement or built for Fu-kin Monster tunes & performance applications (675 - 740+ WHP @110RON or e85Race -RON)

--------------------------------------------------------------------------------

Included in this head setup:

FMSR Stage 2 Cams*

FMSR Modified Fuel Pump Lobe** (if applicable)

FERREA Intake Valves (1 oversized)

FERREA Exhaust Valves (1 oversized)

GMPP Valve Seats (4 angle regrind)

FERREA Valve Guides

GMPP Lashes

JESEL Followers

Viton Valve Seals

FMSR Port / Polished & Tuned*** (Flow Benched)

FMSR Valve Springs (options listed above)

FMSR Spring Retainers (Titanium)

FMSR Seats (Titanium)

ARP Head Studs - Oversized

ARP Cam Studs - Oversized

--------------------------------------------------------------------------------

*FMSR Stage 2 Cams Card Info: Intake: 2XX@ .42X” & Exhaust: 2XX@ .42X” - Lash @ 1mm

**FMSR Fuel Lobe Info: 3 High valley design

***FMSR Head Porting Info: #2.5 ceiling design
 
#30 ·
fmsr stg6 8950+ 600 core

FMSR Performance Stage 6 head - "Leão"

The FMSR Performance Stage 6 head is a Fu-kin Insane, Tricked out, Monster aluminum cylinder head, specifically for Sick Ass [60 - 99+PSI] tunes and performance applications. This head utilizes top notch manufacture's parts and using the industry’s tightest machining tolerances for enhanced performance, exact component fit and maximum durability. ALL bolts are torque to manufactures specs. ALL OEM parts are Brand New.

Core options & Charges:

FMSR Performance Heads are avaliable for all Gen I, Gen II and Gen III Ecotec blocks.

Direct core buyout is avaliable for an additional cost.

PLEASE NOTE: If you are shipping in your core to us and it is found damaged upon inspection [cracked/ chipped/ distorted] beyond repair, the core charge will be kept or charged to offset the cost of purchasing another cylinder head for your build. Shipping (to or from) is the owner's expense if the block is damaged upon inspection.

--------------------------------------------------------------------------------

Application: Direct performance replacement or built for Fu-kin Insane tunes & performance applications (810 - 999+ WHP @110RON or e85Race - RON), (1100+ WHP @e100Race RON with ZEX™ 200 Wet shot of Nitrous Oxide & FMSR Gridle block).

--------------------------------------------------------------------------------

Included in this head setup:

FMSR Stage 2 or 3 Cams*

FMSR Modified Fuel Pump Lobe** (if applicable)

FERREA Intake Valves (oversized)

FERREA Exhaust Valves (oversized)

FERREA Valve Seats

FERREA Valve Guides

JESEL Lashes

JESEL Followers

FMSR VITON Valve Seals

FMSR Port / Polished & Tuned*** (Flow Benched)

FMSR Valve Springs (options listed)

FMSR Spring Retainers (Titanium)

FMSR Seats (Titanium)

ARP Head Studs - Oversized

ARP Cam Studs - Oversized

--------------------------------------------------------------------------------

*FMSR Stage 2 Cams design is based for street tuning and Stage 3 Cams design is based track performance tuning.

**FMSR Fuel Lobe Info: 3 "Speed Bump" design (Direct Injection - LNF / LDK / LHU / LTG)

***FMSR Head Porting Info: #2.66 design
 
#33 · (Edited)
you can still get zzp trans

fmsr f23

Brand: FMSR
Product Code: FMSRF23T
Reward Points: 999
Availability: In Stock

Price: $999.00
Price in reward points: 9999



Available Options


* Cryo Treatment:
--- Please Select --- No THANKS!! Yes - Treat it!! (+$96.00)


* Transmission Level Option:
--- Please Select --- LEVEL I (+$464.00) LEVEL II (+$788.00) LEVEL III (+$3,399.00)


* Final Drive Gear:
--- Please Select --- 3.84 (+$360.00) 3.94 (+$380.00) 4.17 (+$430.00) 4.41 (+$490.00)


Share Share on emailShare on print Share on facebook Share on twitter

Description Reviews (0)


FMSR F23 Transmissions are one step a head of the competition, we have set the stage to a whole new level in offering a transmission than can handle the power from high HP builds. Our transmission has been fully modified for the street or the track. Each new or lightly used transmission has been stripped down to the case, with some of the components machined to our specs. Then the case and the critical components are shot peened and cryo treated, finally the transmission is re-constructed / blueprinted under temperture to achive factory or our optimal preloads specs.
• All transmissions are sourced from AC/Delco and/or from Sweden.
• All final drive gear sets are brand new and manufactured here in the USA.
• All transmissions are warrantied for 1 year.
• All transmissions are LSD equiped.
• Oil channels are slightly enlarged for better fluid flow and control. (LEVEL II or III)
• Critical pieces are shot peened prior to cyro treatment to add overall strength.
• Re-constructed under temperture to factory or FMSR preload specs.

--------------------------------------------------------------------------------

All transmissions must be shipped in and inspected prior to your order being processed and shipped.

Non LSD or Damaged transmissions will be assessed and the customer will be advised based on the cost of replacement parts or charges.

--------------------------------------------------------------------------------

Performance Level Features:

LEVEL I: (Slightly modified FMSR transmission)
• Cryo Treated Transmission
• Upgraded Dowel pins
• Upgraded Sleeve / Washer
• Upgraded Tab bolt
• Slightly tighter than factory preload specs

LEVEL II: (Heavily modified FMSR transmission)
• Critical pieces are shot peened (first)
• Cryo Treated Transmission (second)
• Upgraded Dowel pin inserts
• Upgraded Sleeves Washers
• Upgraded Tab bolt
• Upgraded Case bolts
• Enlarged oil channels
• FMSR tighter preload specs

LEVEL III: (FMSR extreme transmission)

All LEVEL III transmissions are non-warrentied.
• All LEVEL II options included
• New custom gears
• New Input shaft
• New pinion shaft
• New custom final drive gear set

--------------------------------------------------------------------------------

Applications: Direct manual transmission replacement or for Mild to Insane street performance applications.

--------------------------------------------------------------------------------

In the shipping crate:
• 1 - FMSR F23 Transmission1
• 1 - Spec / Info sheet
• 1 - Warranty card.

NOTE: Transmissions are freight shipped or BongoUS when shipped overseas.

1Transmission is shipped with light coat of fluid installed but not filled due to US and overseas shipping regulations.

--------------------------------------------------------------------------------

Options:
• Second Cryo treatment
 
#34 ·
FMSR F35 Transmission



FMSR F35 Transmission


Brand: FMSR
Product Code: FMSRF35T
Reward Points: 999
Availability: In Stock

Price: $999.00
Price in reward points: 9999



Available Options


* Cryo Treatment:
--- Please Select --- No THANKS!! Yes - Treat it!! (+$96.00)


* Transmission Level Option:
--- Please Select --- LEVEL I (+$464.00) LEVEL II (+$788.00) LEVEL III (+$3,399.00)


* Final Drive Gear:
--- Please Select --- 3.82 (+$390.00) 4.05 (+$390.00) 4.45 (+$465.00)



Qty:

- OR -

Add to Wish List
Add to Compare


0 reviews 0 reviews | Write a review


More Sharing ServicesShare Share on emailShare on print Share on facebook Share on twitter

Description Reviews (0)


FMSR F35 Transmissions are one step a head of the competition, we have set the stage to a whole new level in offering a transmission than can handle the power from high HP builds. Our transmission has been fully modified for the street or the track. Each new or lightly used transmission has been stripped down to the case, with some of the components machined to our specs. Then the case and the critical components are shot peened and cryo treated, finally the transmission is re-constructed / blueprinted under temperture to achive factory or our optimal preloads specs.
• All transmissions are sourced from AC/Delco and/or direct from Sweden.
• All final drive gear sets are brand new and manufactured here in the USA.
• All transmissions are warrantied for 1 year.
• All transmissions are LSD equiped.
• Oil channels are slightly enlarged for better fluid flow and control. (LEVEL II or III)
• Critical pieces are shot peened prior to cyro treatment to add overall strength.
• Re-constructed under temperture to factory or FMSR preload specs.

--------------------------------------------------------------------------------

All transmissions must be shipped in and inspected prior to your order being processed and shipped to you.

Want a FREE transmission installation? - drive in and we'll install it for FREE. Please contact customersupport@fmsrperformance.com to setup an appointment.

Non LSD or Damaged transmissions will be assessed and the customer will be advised based on the cost of replacement parts or charges.

--------------------------------------------------------------------------------

Performance Level Features:

LEVEL I: (Slightly modified FMSR transmission)
• Cryo Treated Transmission
• Upgraded Dowel pins
• Upgraded Sleeve / Washer
• Upgraded Tab bolt
• Preload Specs - Slightly tighter than factory

LEVEL II: (Heavily modified FMSR transmission)
• Critical pieces are shot peened (first)
• Cryo Treated Transmission (second)
• Upgraded Dowel pin
• Upgraded Sleeve / Washer
• Upgraded Tab bolt
• Upgraded Case bolts
• Enlarged oil channels
• Additional FMSR external transmission cooler kit
• FMSR preload specs

LEVEL III: (FMSR extreme transmission) - Please contact customersupport@fmsrperformance.com for avaliable options.
• All LEVEL II options included
• New custom gears
• New Input shaft
• New pinion shaft
• New custom final drive gear set

--------------------------------------------------------------------------------

Applications: Direct manual transmission replacement or for Mild to Insane street performance applications.

--------------------------------------------------------------------------------

In the shipping crate: - NOTE: Transmissions are freight shipped within the 48 states or BongoUS when shipped overseas.
•1 - FMSR F35 Transmission1
•1 - Spec / Info sheet
•1 - Warranty card2

1Transmission is shipped with a light coat of fluid installed - but not filled due to US and overseas shipping regulations.

2Warranties:
•6 months for transmissions that are shipped to customers.
•12 months for transmissions that are installed for free at FMSR.

--------------------------------------------------------------------------------

Options:
• Second Cryo treatment
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top