Quote:
|
Originally Posted by BlacK05SS
I just installed a 3.0 pulley from pulley tech. When I started the car there is a squeaking noise comming from the car. Could this be because I put too much anti seize on the shaft because the pulley was really hot after 7 min of idleing. I just don't want to be driving the car if this is hurting it. I thought it was a belt slipping but I am hitting 15psi with no problems. So maybe it the pulley is slipping on the shaft. I don't know I am lost/frustrated  |
Hmmm... what did you use to remove, and reinstall the pulley? Did you get anti-sieze on the belt or pulley itself? |
__________________
'05 Stage 2 Redline -One of the few Red REDlines
Sp00n's HP Tuned GM Stage 2, K&N CAI, SFPH 2.8" Pulley, GMPP Exhaust Manifold, B&M Shifter, Eibach Drop, GMPP Rotors, JBP Brake Lines, URC-Subframe, TqForward Strut Bars.
260whp 225wtq
1/4 - 14.0 @ 103.7
Red Red Line Club #001
|