Quote:
|
Originally Posted by Hyperion
Dang. Without a baseline, that's a bit of a let-down. I'm not suprised about the low torque #s with a 3" exhaust but you're roughly 25 ponies higher than what most dyno stock with full exhaust, AND TB, & intake.
|
The tq will go up when you can get more air in, the pulley is a good example... the TB is of little hp value. Not until the numbers climb into the 300 whp range. Si he made about 20-25 hp with the exhaust and intake. Not too bad. Start pushing 17psi and see what it does for ya...