[Custom Tubes Inc.]

Glad to see you got them to pull there head out of the sand and do there job fix the car. Alot of people do not diagnose and just jump to conclutions. Thanks for the update willy

Originally Posted by mgm1979

Willy, you'll never believe this...after all the back N forth with the dealership over the idling issue, last night they took the car apart, replaced the Cam Sensor (on a hunch), pulled the plugs and found they were gapped at .035 instead of the OEM .045, AND found the intercooler wired backwards. Upon re-wiring it correctly, discovered the pump doesn't even work.

Long story short, the 225 dyno #s from last month (or whenever it was) are off, and we should see some improvement when I take "her" back in for a new baseline Wednesday morning. That same afternoon, we'll see what she can do with the Stage 1 kit + 3.15, 2.9, and 2.7" pulleys.

Stay tuned - I'm sure the baseline will show some improvements, and the "new" mods will more fully utilize the extra breathing room from the header/exhaust pkg!