Quote:
|
Originally Posted by BlackSS
Alright I will try that. I was doing the adding part right I guess. Cuz I was copying a - number and adding to the ve TABLE. Example: 10+ -5 = 5. How do I set up a histo with LTFT and STFT and how do I set up the filter for the TPS% and can I set up a filter that will only show cell counts over 40? Thanks for all your help man!
|
http://www.hptuners.com/help/demos/C...stom%20PID.swf
This will tell you how to make the custom PID and and how to put it in the histogram. THe only difference is use the PID values instead of the SENS values.
Also when you create your custom histo and your PID, make sure you add the new PID to the list of monitored sensors before your start recording.
Paste [PID.17]<80 in the plot filtering. PID 17 is the throttle position. Also change the cell hits required to 40. Maybe don't do the cell hits required part until you want to actually modify the VE. It makes real time monitoring a bitch.
Also don't add the number. Fuel trims are a percentage, so to compinsate for a -8, multiply the value by .96 (100% - (8%/2)). For a +12, multiply by 1.06 (100% + (12%/2)). |
__________________
04 Redline,
Power: HP Tuners, 2.6 ZZP pulley, 60 lbs injectors, Snow Performance Methanol Injection, Cobalt Addiction HE, Cat-less mid pipe, K&N CAI, ZEX Hyperformance plugs, Jason Smith Header, SMS Ported TB
Handling: Eibach Pro Drop, BFG DR's, Strut Tower, Rear Sway
BWoody: Solid Mounts, Tractions bars, Sway Bar Endlinks, Powercoated Valve Cover
13.431/103.68/9-14-06 @ MIR
"I'd say in a givin week, I probably do about 15 minutes of real, actual work."
Last edited by ptparker; 06-14-2006 at 01:42 PM.
|