|
RL Owners.. Want a Smaller Pulley?
|
First off.. What is the size of the stock Supercharger pulley?
As for the smaller pulley's. If it's a regular press fit pulley like all Eaton superchargers use. You can use the Pulley's designed for the M90 Supercharger. The shaft is the same size.. The only problem is if the snout is able to accept smaller pulley's.
From what i've read.. The ECU is already dumping boost because it's designed to at a certian point. Without a cracked ECU.. The smaller pulley will only add Low-Mid Range Torque.
If i go ahead and purchase a used 04 Redline. I'll have a writeup about how to install a smaller pulley in a week's time.
|
__________________
[size=1]2001 Pontiac Grand Prix GTP - Blown Tranny
1/4th : 13.54@101.89mph 1.97 60ft
2002 Chevrolet Corvette Z06
Mods : Patriot Stage 3 LS6 Style Heads, Custom 220/230 Cam
Stock Dyno Numbers : 347Rwhp, 335Rwtq
[/size]
|