Quote:
|
Originally Posted by XeroState
1) The stage 1 and 2 calibrations are the same
2) There is no hub on the s/c in stock form. The hub comes in the stage 2 kit
3) Depends on which 76mm pulley you want. Nate makes pulleys that fit the stage 2 hub in various sizes while other company's produce their own hubs.
All hubs are press-fit on, just like the factory pulley.
|
this was the pully i want to put on instead of the 78mm that the stage 2 kit comes with. do you know where i can get a hub that would fit this one
http://www.crateenginedepot.com/stor...P1749C221.aspx
will the belt off the stage 2 kit work on a 76mm pully?