Thread: 86mm flat top piston
View Single Post
Old 05-20-2008, 01:37 PM   #9 (permalink)
Shabodah
Senior Member
 
Shabodah's Avatar
 
Join Date: Aug 2005
Location: It gets cold...
Posts: 10,391
Quote:
Originally Posted by ub3rn00ber
Huh? So what motor do i need the pistons out of?
The combustion space in the head is what is changing the compression ratio, so the pistons are the same.

I also have a set of used 2.2L pistons (actually an entire rotating assembly and a head - the block had an casting issue causing a minor oil leak).
__________________
There's nothing quite like a sneeze in the middle of an S-curve (fine, it's a freaking chicane!) at 90mph while trying to pass on the inside (of the second portion of the curve).....
Shabodah is offline   Reply With Quote