Saturn ION Redline Saturn ION Redline Forums

» Featured Product
» Wheel & Tire Center

» Sponsors
» Sponsors
Go Back   Saturn ION RedLine Forums

Please Visit our Site Sponsors
RedlineForums.com is the premier Saturn ION Redline forum on the internet. Registered Users do not see the above ads.Please Register - It's Free!
View Single Post
Old 04-29-2009, 10:11 AM   #13729 (permalink)
Eagle_f90
Senior Member
 
Join Date: Sep 2005
Location: Derry, NH
Posts: 4,811
The offical poject listing, and priority (listed from high to low)

Project Blue: Compleate repaint to a metalic blue with red accents. This will include all trim, mirrors, crawel, b piller, fog light inserts, and any other black plastic on the car. A CF deck lide and hood will be put on, the hood may or may not have a scoop in it. The Saturn logo will be ghosted on the hood, a second exchaust port cut, the fake air scoops on the front facia will be opened. All exposed bolts will be powdercoated

Project Evolution: A 4 phase project invloving an LNF swap.
Phase 1 drop a stock LNF in the car and get it running (reguires LNF BCM and BCM <-> ECU harness, will probibily need the gauge cluster out of an 09 Cobalt SS).
Phase 2 is GM Stage 1 for LNF. This will remove the learn down function in the ECU and give me a better MAF to work with.
Phase 3 is to replace the whole turbo setup with the stock m62 setup and tune.
Phase 4 is to place a TVS on the LNF wiith custom CAI

Project 7: A Windows 7 based system will be installed in the current radio's location and all stero equipment will be added.

Project Inside (working title): Put real race seats into the Redline and redo the interor to make it look lots better then the stock black

Misc stuff to be done when ever:
Rotated mounts, Coilovers, Dual exchust, upgrade front sway bar, Brombo breaks, rear sway, upgraded lower control arms, upgrade stearing gear, LNF transmision, LNF Axels, LNF knuckles, short throw shifter, Side turn emblems, lightweight rims with r-compound, powder coat rims, color center caps on rims, custom fuil rail cover, custom fuse box cover, killer glass for radiator, wire tuck for engine bay, single pass IC with option "b", griffen H/E replacement for OEM H/E, water sparyer for H/E, PnP of LNF head, upgrade valve springs on LNF, neutral banlence shafts, Forged Pisions, sub fram brace installed, Projector retrofit, HIDs.
__________________
urayamu koto ni narete shimattara
hokoreru jibun ga toozakatteku
(If I get used to enving others
those parts of myself that I am proud of will reced from me.)
-Stellvia

Page 1171, a tribute to me from the NE crew

Last edited by Eagle_f90; 05-07-2009 at 07:25 PM.
Eagle_f90 is offline   Reply With Quote
 
Powered by vBadvanced CMPS v3.1.0

All times are GMT -6. The time now is 04:01 PM.