Ring sizes available?

[my_bd]

Does Billetflow have a 3" pulley ring?

I already have the 3.1 and 2.9

Thanks

[mgm1979]

Originally Posted by my_bd

Does Billetflow have a 3" pulley ring?

I already have the 3.1 and 2.9

Thanks

Yeah, what ARE the sizes available for our RLs? I think I'm confusing myself on your guys' site (been one of those weeks).

[G Cham 05 silver redline]

Well The Ring Sizes For The Rl / Ss Are
3.15
2.9
2.7

[my_bd]

I'd like to know if Billetflow will have a pulley ring that matches the size of the pulley that comes with the GM Stage 2 kit (whatever size that turns out to be...rumored to be 77.9mm I think....)

[mgm1979]

Originally Posted by my_bd

I'd like to know if Billetflow will have a pulley ring that matches the size of the pulley that comes with the GM Stage 2 kit (whatever size that turns out to be...rumored to be 77.9mm I think....)

Me too - this would be a MUST...I get that ring, plus 2 others I think.

[BilletFlow]

Originally Posted by my_bd

I'd like to know if Billetflow will have a pulley ring that matches the size of the pulley that comes with the GM Stage 2 kit (whatever size that turns out to be...rumored to be 77.9mm I think....)

77.9mm x .03937 = 3.066923

This is VERY close to our 3.150

There are other factors to consider also.

The GM pulley is not sandblasted, nor is it of the non-slip design. Ours is.

The GM pulley WILL slip more at high rpm than our pulley. Ours will slip less.

Therefor you will see almost the same boost level at peak rpm and therefor need the same tune as the GM stage kit.

[my_bd]

will Billetflow consider making a 3.0?

[djt81185]

Do you have any of those Billet idlers done? Also can a stock car run the 2.7 if they use a boost controller to limit the boost. Also how do we order. I've been trying to all weekend lol.

Dan

[mgm1979]

Ok, so down and dirty answer please...

My dealership has a puller (don't know which one, Pulley Boys?) - are they all the same, as far as installation goes? Can we pull the stock pulley and install these BF pulley rings/hubs with any puller, or what?

Gotta factor ALL the elements into the decision-making process...I think this is the last issue, before the money starts flying.

What about that group buy???

[my_bd]

my Billetflow pulley was installed by Sinister Redlines with the PulleyBoys tools