WTB 60lb hour injectors and 2.5 pulley

[SATURNTERMINATOR]

Hi guys,

Im looking for a set of 60lb injectors and a 2.8" pulley

I will also consider 42lb injectors and larger pulleys as well. Thanks!!

-Brandon
248 217 9864

[burnrubr88]

i think a nice 2.7 or 2.8 will do u nice if you go with 60s. If you go with below a 2.7, you will need an a$$ of cooling mods, as well as a full exhaust. The lower pulley you go, the more supporting mods you will need.

[kombi731]

2.5 won't fit a stock snout on the M62

[SATURNTERMINATOR]

I am trying to piece together the Intense stage 5 kit basically without the blower porting

There kit doesnt use any kind of cooling mods, do you guys think thats a bad idea? Im trying to do all the research I can and figure out whats best. When I talked to them on the phone they said their kit could be installed on a bone stock redline. http://intense-racing.com/Merchant2/...ry_Code=LSJ_PP

Does there HP claim sound about right for a dynojet dyno?

Will the 2.7 pulley require snout machining? From what I can tell the 2.8 is the smallest without machining?

[OEM_Reject]

If I were you, I'd spend a little more time browsing these forums. Theres been a lot of doubt in Intense's abilities. Most of their tunes run lean. They make their kits produce the most power with the least amount of reliability. There are much better ways to acheive good power numbers than just blindly throwing in big injectors and a tiny pulley. As far as a 2.7 w/o machining goes, it depends on who makes the pulley system. Some will fit without machining, some wont.

[SATURNTERMINATOR]

Thanks for the feedback thats exactly what I was looking for.

does anyone else have some bad eperienxce with them or know of a different place that can tune the computer to a safer tune, I though they looked good as they only charge 100 for a tune

Im not looking for crazy power, if i run the 2.8 pulley do i need the 60lb injectors or can I just run the 42lbers? With exhaust does that generally put you around the 260WHP mark?

Really appreciate the feedback guys thanks again!!

[billabong9687]

I have a 2.7 for sale. pm me if you are interested

[SATURNTERMINATOR]

bump !

[elecblue06]

i might have a set of 60's as well as the harness you need for it for sale.. i got them with my boost setup and i figured i'd try to see if it'd work with my 2.4 if it doesn't (which it probably won without alot of work.. then i'll post up here