Got your WOT Box (2-step) yet? I do... (vid inside)

[vanamburg]

edit that question figured it out

[hawlyns711]

^^Its a launch control, so when you have the clutch down and you go WOT it holds your RPMs steady at whatever you want to launch at, then you let off the clutch and you can drive like normal (or race) and then when you shift you don't have to let off the gas (WOT shift) and as soon as the clutch is depressed it cuts ignition for a smoother (and faster) shift which is easier on your motor. Once the clutch pedal is let back up ignition resumes and you're off into the next gear.

edit: d'oh!

[vanamburg]

so the no lift shift is like the launch feaature that the ss/tcs have correct?
and the 2 step feature is like speed shifting without the damage to ur tranny?

[hawlyns711]

Originally Posted by vanamburg

so the 2-step feature is like the launch feaature that the ss/tcs have correct?
and the no lift shift is like speed shifting without the damage to ur tranny?

fixed ya there, but yes

[vanamburg]

thats awesome thanx bro

[hawlyns711]

bump who's getting one?? software comes with nitrous window switch built in now

[CmYiOnGoFaSt]

Well got installed it used it about 5 times.The 2-step is about useless,Unless you have stronger axles and slicks and LSD.But with one wheel wonder all my car dose is fill the cabin up with smoke..Now the no lift to shift is kinda bad ass.If your exhaust is hot enough sometimes you'll shot a flame out.But my car started throwing TPS codes every time i got passed half throttle.So i had to remove it.Now my car wont start.I can not for the life of me figure out why it wont start.It turns on everything lights up turn the key and nothing.I think its the clutch position sensor.Cause thats one of the wires you need to tap into but i checked it and rechecked it.Any help would be nice.

[InfraRedline]

If you left it wired in and took out the box it will not start because the box completes the ignition circuit

[hawlyns711]

^ya because during the installation you cut a wire in half and put a different harness wire to each end could be the problem

[CmYiOnGoFaSt]

Okay that wasn't it.But i left the key on so i could lisen to the radio.So when i put the clutch wire back together it blew the clutch fuse.Like a big dumy i never checked that.But its all fixed now.But im still getting the TPS code.I guess i need to search it.Thanks for the help guys.