Cut Springs

[Darkmanx]

RATED R FOR RICE

How do you guys think the car will ride with cut springs? Just a question

ps. i already have eibachs so dont come in here with your bs.

[qwikredline11]

I did it rides excellent, some increase in rate. I am sending a set to a friend...the real issue is will it stay in the spring seat at the front not so much at the rear especially; the rear eibachs have dead coils that keep the spring in place when the wheel drops all the way down, i just tie wrapped the rear spring to the spring seat/bump rubber and tied that off to the spring perch to prevent fall out when jacking....

[Darkmanx]

Originally Posted by qwikredline11

I did it rides excellent, some increase in rate. I am sending a set to a friend...the real issue is will it stay in the spring seat at the front not so much at the rear especially; the rear eibachs have dead coils that keep the spring in place when the wheel drops all the way down, i just tie wrapped the rear spring to the spring seat/bump rubber and tied that off to the spring perch to prevent fall out when jacking....

Did you cut them yourself? and do you have pics?

[04Redline0124]

Originally Posted by Darkmanx

Did you cut them yourself? and do you have pics?

we can do ours at joes, he did brandons on his RL, they came out good, just took awhile lol

[qwikredline11]

Originally Posted by Darkmanx

Did you cut them yourself? and do you have pics?

yes email me at qwikredline@hotmail.com for pics, cutting them is a calk walk with a band saw, prolly 60 -120 seconds with an hack saw...depending if you have a good blade

[qwikredline11]

Originally Posted by Darkmanx

Did you cut them yourself? and do you have pics?

Front:
cobalt SSuncut cut
Travel rate lbs rate
12.00” 0
10.50 250
10.00 260 0
9.0 410 300
8.0 570 450
7.5 650 620
cut (uncut wont go down this far)

6.5 740

[Darkmanx]

Originally Posted by 04Redline0124

we can do ours at joes, he did brandons on his RL, they came out good, just took awhile lol

just looked in my closet and i noticed i had all 4 of my springs i thought i had lost one . lol how low is brandon car?

and why not just post the pics?

[qwikredline11]

Originally Posted by Darkmanx

just looked in my closet and i noticed i had all 4 of my springs i thought i had lost one . lol how low is brandon car?

and why not just post the pics?

i cannot post pics to this web site there is not enough mg or whatever storage capacity in the picture gallery + i am an idiot + what more do you want from me? look for a 25.2- 25.5 inchground to fender lip at axle centerline

[Darkmanx]

Originally Posted by qwikredline11

i cannot post pics to this web site there is not enough mg or whatever storage capacity in the picture gallery + i am an idiot + what more do you want from me? look for a 25.2- 25.5 inchground to fender lip at axle centerline

all that right there was chinese

[04Redline0124]

Originally Posted by Darkmanx

all that right there was chinese

hahah x2....and brandons car is about as low as my car is , so i was jsut gunna cut my B&G's so i can get them nice and low, with very minimal wheelgap