 |
10-16-2007
ekool
(Administrator)
|
|
|
|
|
Alright....well I made just a little bit of progress today on my sub install while using the factory radio with my non-AAS system in my '07
First off.....flip down the rear seats and pull the plastic push pins out that hold the back shelf down. ...... Read More
|
Posted by snobrdrdan
- Last Activity 12-07-2009 08:28 PM
by tranced 
|
|
|
|
|
|
|
So the stock speakers suck. My subs added some nice lows, but then I wasn't hearing the highs.....so I decided to add some tweeters.
First thing I did was buy the Advanced Audio System sail panels (~$20-25 for the pair) that have tweeters in...... Read More
|
Posted by snobrdrdan
- Last Activity 04-06-2009 12:06 AM
by snobrdrdan
|
|
|
|
|
|
|
OK this how-to was originally posted by an0malous on the shortbus but there are some who don't go over there and that is why I did one for here!
this will help keep oil form your valve/cam cover breather out of your intake b/c as you can see,...... Read More
|
Posted by hawlyns711
- Last Activity Today 03:36 PM
by tranced
|
|
|
|
|
|
|
Get rid of idle surge
For all of those people out there experiencing surging problems at an idle, this is a fix that only takes about 30 minutes max.... Read More
|
Posted by RL_Clark
- Last Activity 08-22-2010 12:54 AM
by RedlineNoob
|
|
|
|
|
|
|
|
Posted by GMredline
- Last Activity 08-16-2010 08:04 AM
by GMredline
|
|
|
|
|
|
|
I will add pics later, I need to get my camera and upload.... Read More
|
Posted by U-RaceCars
- Last Activity 08-14-2010 02:06 PM
by Watts-Up
|
|
|
|
|
|
|
This is by far the best visual mod for FREE!
The stock antenna is in a weird location and there's no replacement antennas available that look halfway decent, but with this mod you can keep your stock antenna and get great reception still but it...... Read More
|
Posted by snobrdrdan
- Last Activity 06-24-2010 09:54 PM
by golden chicken
|
|
|
|
|
|
|
anybody know how to install a oil psi gauge i think i found the warning sender but not sure how to remove it.... Read More
|
Posted by GQ1081
- Last Activity 05-09-2010 09:47 PM
by liamrh
|
|
|
|
|
|
|
Replacing Roll Pin
Replacing roll pin in linkages on transmission when shifter is sloppy or you lose all gears.... Read More
|
Posted by ralliartist
- Last Activity 05-09-2010 04:00 PM
by Cynic
|
|
|
|
|
|
|
Tools Needed:
1 - 9/16 opened end wrench
1 - ratchet
1 - 9/16 socket
1 - set of car ramps
Estimated install time:
10 - 15 minutes... Read More
|
Posted by wasntme
- Last Activity 04-28-2010 06:56 PM
by golden chicken
|
|
|
|
|
|
|
secondstringsoldier
This How-To takes you through step-by-step to install and aftermarket tachometer and tach adapter.... Read More
|
Posted by secondstringsoldier
- Last Activity 04-19-2010 07:19 PM
by bluesat
|
|
|
|
|
|
|
I've loved the feel of the B&M since I first installed it, but the shaft length is a little to long fo me, so I decided to fix that. This mod will allow you to keep the reverse lockout feature and use the knob that came with the shifter (or use any...... Read More
|
Posted by OEM_Reject
- Last Activity 04-14-2010 01:10 PM
by Kawaking
|
|
