Alright....well I made just a little bit of progress today on my sub install while using the factory radio with my non-AAS system in my '07

First off.....flip down the rear seats and pull the plastic push pins out that hold the back shelf down. ...... Read More

So the stock speakers suck. My subs added some nice lows, but then I wasn't hearing the highs.....so I decided to add some tweeters.

First thing I did was buy the Advanced Audio System sail panels (~$20-25 for the pair) that have tweeters in...... Read More

Here's how I wired up my 12V splitter. Sorry, no pictures, if you have questions, PM me and I'll answer them (I'll try to get pictures asap) I used a Radioshack 3 outlet car power adapter...... Read More

How to install lowering springs


Tools Needed:
- 19mm socket
- 18mm socket
- Ratchet or Breaker Bar
- Jack
- Jack Stands
- Torque Wrench... Read More

ok it really depends on what you get but i recomend the stuff at pepboys or some auto store, because they are cheap ($30) and look and are sturdy for your looks to $ spent, and one thing will do the front and the rear and still have some left over....... Read More

Tools you will need:
2 small flat tipped screwdrivers
needlenose pliers
roll of electrical tape
1- add-a-circuit
quick splice (red one) or soldering iron and solder

Remove the radio bezel (pull on the two heater vents). Unclip the wiring...... Read More

Well here it is for all those of you waiting for it. How I turned my side emblems into turn signals. Now I need to make one thing clear right now, there are many things in this how-to that you can do different, this is just what worked best for me...... Read More

How to install an LC1 wideband into an LSJ-equipped car (Redline, Cobalt SS)... Read More

if you go to the track alot its will help cool the supercharger down alittle while staging..

http://www.*************/forums/showthread.php?t=68621

there is a video and pics in there...

PS. Just add cobaltss. net where the stars...... Read More

heres a quick, easy, and cheapest way to keep water off of your intake. all you need is a piece of cut plastic ( i used some old plastic that came off the car when i put the K&n typhoon on my car), a plastic push push pin? (dont know what to call...... Read More

... Read More

For those that like to gut their cars on track day, or just for fun... *coughTibscough*:

Tools:
1 x 15mm wrench or socket wrench

How to remove the driver's side...
First:
Unclip the Driver's side "Seatbelt Sensor..."...... Read More