LAST question my my new interceptor...hopefully

[burnrubr88]

so after a few days of having it and gettin use to it, im not sure bout a couple things. i mentioned earlier that my HP and MPG parameters read 0 all the time. how do i get that to work and give me a reading? and also, some parameters such as knock retard, feul level %, injector flow, and throttle volts, dont show a reading at all. it just freezes the reading from the previous parameter if im cycling thru. then if i am scanning 2 parameters at once (the ones i mentioned a sec ago) my gauge shuts off completely and reboots. whats goin on? is it faulty? its brand new from the website.

[thedubsack85]

if you have the interceptor corrected for your car's weight and your altitude it should read HP no problem.. and as far as it shutting down and rebootin is it hooked to a good power and ground?

[burnrubr88]

thanks ill try settin those in a few min. but as far as power, mine didnt need seperate power, just got power right when i plugged it to the OBD. but it only shuts off when i wanna read those "freezing" parameters. its never shut off before unless im veiwing those.

[thedubsack85]

Originally Posted by burnrubr88

thanks ill try settin those in a few min. but as far as power, mine didnt need seperate power, just got power right when i plugged it to the OBD. but it only shuts off when i wanna read those "freezing" parameters. its never shut off before unless im veiwing those.

you have a single setup.. ok i had the dual's. never had a single problem with em.. they told me what was wrong with the car.. code pulling and clearing..

[burnrubr88]

yeah it reads those fine, when i plugged it up for the first time i had a few and cleared them. its just those few settings when i started this thread that im not sure about and cant figure out how to work for me. sorry if ur tryin to explain somethin easily and im not understandin lol. i just got it and not too familiar with everything.

[thedubsack85]

Originally Posted by burnrubr88

yeah it reads those fine, when i plugged it up for the first time i had a few and cleared them. its just those few settings when i started this thread that im not sure about and cant figure out how to work for me. sorry if ur tryin to explain somethin easily and im not understandin lol. i just got it and not too familiar with everything.

try fucking with the data refresh rates.. like make it read(sample info) slower. the setting may be to fast.. or try the record function and rip on her read the playback..

[burnrubr88]

gotcha, ill experiment. i also sent aeroforce an email askin bout the redline paramters on the gauges. thanks man. if anyone else can help or has ideas, please inform.

[thedubsack85]

Originally Posted by burnrubr88

gotcha, ill experiment. i also sent aeroforce an email askin bout the redline paramters on the gauges. thanks man. if anyone else can help or has ideas, please inform.

its most likely the sample rate.. i had the same problem where i couldnt see what my car was doing on certain thing's like knock and MPG... messed with it and got it to work great.. good luck

[burnrubr88]

hmm. slowed the data to 4, 5, and 6. mpg always read 0. knock took a sec, but then read 0.0, but others i was havin problems with, like fuel level % and injector flow didnt show either. and hp im just not sure about at all. its reading 0, but i put "205" in the HP adjustment setting, and its giving me about 9 at idle, dunno really bout that.

[thedubsack85]

Originally Posted by burnrubr88

hmm. slowed the data to 4, 5, and 6. mpg always read 0. knock took a sec, but then read 0.0, but others i was havin problems with, like fuel level % and injector flow didnt show either. and hp im just not sure about at all. its reading 0, but i put "205" in the HP adjustment setting, and its giving me about 9 at idle, dunno really bout that.

if it aint working by slowing it down have you tryed date rate 1? making it quicker? the sample rate that is.