Anything not listed on our website that youd like ? Let us know !

[Modernceo]

Anything not listed on our website that youd like ? Let us know !

Other than the parts we are trying to develop for the Ion Redline, are there any other parts that you would like for us to carry that we dont currently carry ? If so, let us know by phone, or email !

We are willing to stock the parts that Redline owners want !

[fenderdan412]

there4s probably nothing that modern can do about this but us redliners need some wheels....ive been looking for a black with machined lip set but none come in 5x110....at least in the states

[unknownsuperhero]

Some of these parts you probibally carry, but maybe you could update the Redline page to reflect it.
Does your Cobalt test can have the same shifter assembly as the RL? If so then some boogers are definately in order and they are preselling the B&M short shifter somewhere else, maybe you could provide that as well.
As far as aesthetics, do you guys have someone that can fab some clear corners?
How about stocking the titanium turn signal bulbs I think they are 1157's.
Maybe some lighter pullies, even though underdrive won't work for this application I wouldnt mind taking some weight off the drivetrain.
Ans I won't tell anyone if you make/find a 3 pod full pillar mount
Drilled and slotted rotors and caliper paint.
Redline water wetter
New spark plugs with the stock, and one colder heat range, Copper, or iridium, NGK etc.
How about a Cat Back exhaust? (is it ran like tha cobals as well?)
Strut tower bar
A job?
Man if I think of any more I will post it. This is just my immediate desired list.

[Sp00ner]

Ummm... well.. that takes any ideas I had off the top of my head...

[Sp00ner]

Got anyone that is running that SAFC-II? Been wondering if that's compatible or not, it seems popular opinion is that it's not... I'm not sure why it wouldn't be, but it's expensive to be wrong in that case...

[Vita]

what about shifter bushings? i know it's a cheap alternative to getting a short throw, and i know we could use them. any word, or did we not show enough support for that one? if not, can you PM me about how exactly i can go about getting what i need to do it and whether or not i can get them machined anywhere, or if i need to go specialty shop for that?

[JeffB#2]

Originally Posted by Vita

what about shifter bushings?

I'll send you a PM with what is needed for starting details. Modern would like to look into this, I'd like to help out.

[Modernceo]

Free oil change, Dyno, Leading Edge products event - Houston Texas !

Leading Edge is looking for Ion Redlines, Cobalt SS's, and Dodge SRT-4's for a special event in which their line of products (ie, engine oil, coolant additive and octane boosters) will be given to a select few, and dyno tested before and after. Leading Edge will pay for the dyno time, pay for the oil changes at a local shop called Carboy near us.

To make it even more special, a raffle will be held, and the person picked out of the participants will have free Leading Edge oil for 6 months !

Lastly, your car might be part of a commercial filmed for national television and on the Leading Edge website.

So, to summarize, if you participate in this special event in Houston Texas, Leading Edge will do the following for you :

Free Leading Edge synthetic motor oils
Free oil change done by Carboy in Houston Texas
Free dyno time
Free octane booster and radiator treatments
Possible chance for your car to be in advertisements and on Leading Edges website !
This is worth at least $100 to you in products, and dyno time !
Requirements:
Your car should be in, or near Houston Texas so that you can make it to this event.
Your car should be fairly stock, or with very limited bolt on products.
Your car should be near oil change time, and be NOT using Leading Edge products now.

Post if your interested, and we can arrange a date that will be suitable for everyone here. If you would, please post your contact phone number so we can get in touch with you.

[davytudope]

Originally Posted by unknownsuperhero

3 pod full pillar mount

yes, i second that. or 1 or 2 pod, but mostlly 3.

[fullthrottle]

Originally Posted by Modernceo

Anything not listed on our website that youd like ? Let us know !

Other than the parts we are trying to develop for the Ion Redline, are there any other parts that you would like for us to carry that we dont currently carry ? If so, let us know by phone, or email !

We are willing to stock the parts that Redline owners want !

I know I speak for others when I say that Id like to see a tripple gauge and a dual gauge. a pillar pod that looks good and dosent cost 255.00 bucks