ill lean????

kazkillinger · 03-16-2005, 01:54 PM

so i got all the updates (cam shaFT seal ext crank update, etc) and the next day ses throws a lean code

?!?!?!? NEVER has it done that i took it back asnd the tech said that the intake thing i made for it is doing it and i am lall like nah i ve had that on since novemeber and it didnt shoo that code till u did that update! anyone has any suggestions

**Sp00ner** · 03-16-2005, 02:02 PM

I think if you search on here, if you're not doing it already, there are a few cases of similar things happening with the intake mod. I believe it had something to do with the MAF sensor getting knocked outta place. Which could prety easily happen with all the stuff they have to get at.

John · 03-16-2005, 02:12 PM

Quote:

Originally Posted by Sp00ner

I think if you search on here, if you're not doing it already, there are a few cases of similar things happening with the intake mod. I believe it had something to do with the MAF sensor getting knocked outta place. Which could prety easily happen with all the stuff they have to get at.

mine was from a loose vacuum line from the cam cover to below the maf sensor. put it on right light never came back

dL_RL · 03-16-2005, 11:02 PM

Quote:

Originally Posted by kazkillinger

so i got all the updates (cam shaFT seal ext crank update, etc) and the next day ses throws a lean code

?!?!?!? NEVER has it done that i took it back asnd the tech said that the intake thing i made for it is doing it and i am lall like nah i ve had that on since novemeber and it didnt shoo that code till u did that update! anyone has any suggestions

Yeah i got suggestions. english, thank you.

John · 03-17-2005, 06:59 AM

Quote:

Originally Posted by dL_RL

Yeah i got suggestions. english, thank you.

hehehheehhehehehehhhehehehehheheahahahahahhaahhaha h

kazkillinger · 03-22-2005, 04:41 PM

ok still getting lean codes every since i did that mod of moving the by pass valve. anyone else get this code when doing that mod?

kazkillinger · 03-22-2005, 04:42 PM

p.s. i was also wondering if it throwing that code effects engine performance?

**Sp00ner** · 03-22-2005, 04:42 PM

Quote:

Originally Posted by kazkillinger

ok still getting lean codes every since i did that mod of moving the by pass valve. anyone else get this code when doing that mod?

Put it back, it dosen't do shit, that's number 1.

Number 2, check every hose that you touched, and check your MAF.

**Sp00ner** · 03-22-2005, 04:43 PM

Quote:

Originally Posted by kazkillinger

p.s. i was also wondering if it throwing that code effects engine performance?

Not only performance, but if you run it lean enough you can have SERIOUS engine issues. It could be that the sensor is wrong, and not reading the air right. It's not the light that controls the engine, its the engine management system that controls the light.

kazkillinger · 03-22-2005, 04:53 PM

its not unplugged it pushed down that guy with the gtp said he did it i have put it back about 2 weeks ago but every now and then when i am stopped after driving a while it turns on only when stopped never while in motion

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hacking the MAF Signal to Lean ?	nka	Performance Modifications	15	03-15-2006 02:26 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Registered users do not see this ad. Please click HERE to Register today!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)