Who wants a 2 step launch limiter...anyone...beuller?

[djt81185]

Ok I need someone with HPT, some wire, and some spare time to PM me.

It requires making 2 connections in your ecm connector. if it works when u hit the switch to apply voltage it should give u an adjustable limiter based on the park neutral value in HPT.

if you want in PM me and Ill send u diagram...I can't test this cause Im stuck at work all day.

Dan

[djt81185]

I thought u guys woulda been all over this...damn ricers

[OZERMAN]

elaborate please

[djt81185]

Simulate a auto tranny to the pcm via applying voltage to 2 pins and you SHOULD have a 2nd revlimiter adjustable via hpt

[NoRemorse]

Originally Posted by djt81185

Simulate a auto tranny to the pcm via applying voltage to 2 pins and you SHOULD have a 2nd revlimiter adjustable via hpt

Basically makes a switch so you can choose between 2 different redlines

[bigd2010]

hmmmm oddd...kool though

[djt81185]

Meh fine here is the info

I shaded the correct pins in...apply ign voltage to em and you should be good:

[djt81185]

someone try this LOL

[KSC]

Not bashing this, but I'm curious why you'd want two different red lines on the same tune? If you were going to reflash lets say for street/track wouldn't the desired red line be part of that tune anyway.

I'm probably missing something here, I just need you to tell me what that is.

[NoRemorse]

Originally Posted by KSC

Not bashing this, but I'm curious why you'd want two different red lines on the same tune? If you were going to reflash lets say for street/track wouldn't the desired red line be part of that tune anyway.

I'm probably missing something here, I just need you to tell me what that is.

there are a few things you can do...

one of which being a redline at which is set while on the starting line. Just floor it and it will keep it at a set rpm. Then you flipped the switch after you're moving to up the redline.

PS) you must really hate long island, that sounds terrible!