Ecotec Performace Cams

[Eagle_f90]

Saw this on Create Enegine Depot but not sure what they mean "They physically fit the 2.0L LSJ head, but the vacuum pump / cam sensor will not work in a stock engine." does that mean to have the sensor work we need to mod somthing else? If so what else to do need?

http://www.crateenginedepot.com/stor...-P320C141.aspx

[fullthrottle]

Originally Posted by Eagle_f90

Saw this on Create Enegine Depot but not sure what they mean "They physically fit the 2.0L LSJ head, but the vacuum pump / cam sensor will not work in a stock engine." does that mean to have the sensor work we need to mod somthing else? If so what else to do need?

http://www.crateenginedepot.com/stor...-P320C141.aspx

too much work.... it can be done but it would be easier to get a set of blkank LSJ cams or even some with the stock LSJ profile on them and grind them to the specs you want.

[Eagle_f90]

Originally Posted by fullthrottle

too much work.... it can be done but it would be easier to get a set of blkank LSJ cams or even some with the stock LSJ profile on them and grind them to the specs you want.

Thats the thing, I have no idea what specs I would want or even how to figure them out. I just figured that if I could easily make the GMPP ones work I would.

[fullthrottle]

Originally Posted by Eagle_f90

Thats the thing, I have no idea what specs I would want or even how to figure them out. I just figured that if I could easily make the GMPP ones work I would.

the specs are out there somewhere.

[fullthrottle]

maby this will help you.

More HI-PO Cams???

[Eagle_f90]

Originally Posted by fullthrottle

maby this will help you.

More HI-PO Cams???

Thanks for the bump. So if I am reading that right I can just get the GMPP Blanks and have them ground to the CompCams links by WHOP but how much is a "bit" that he suggest backing down for our blown application? 2-3°?

Edit:

Or maybe go with Duration @ .050*, Valve Lift
INTAKE 193*, 409 EXHAUST 197*, 402 that JBP does on there stage 1 cams for the 2.0

[WSFrazier]

GMPP blanks are for the 2.2. Cam sensor will not fit. Only way to get LSJ cam blanks is either pay ~800 ish for Billet Blank from JBP (Please don't take me seriously, that shouldn't even be an option).

Or get stock LSJ cams re-ground. Personally I would just go with the 272 cams. Proven to work, none have hit the dyno or track yet, but I am sure they will give results.

[fullthrottle]

I agree and if he decides to go that route myself and a few others can help him with that too.

[Eagle_f90]

Originally Posted by WSFrazier

GMPP blanks are for the 2.2. Cam sensor will not fit. Only way to get LSJ cam blanks is either pay ~800 ish for Billet Blank from JBP (Please don't take me seriously, that shouldn't even be an option).

Or get stock LSJ cams re-ground. Personally I would just go with the 272 cams. Proven to work, none have hit the dyno or track yet, but I am sure they will give results.

What are 272 Cams? I googled them and found info from all differant makers.

[fullthrottle]

Originally Posted by Eagle_f90

What are 272 Cams? I googled them and found info from all differant makers.

they're Mitsu EVO cam specs but I have a source that can grind the 280 and 272 cam specs on the LSJ cams. they've prooven to work very well on our cars.