What the Cel ?

[Badanthony]

Put my Psi-fi kit on and a cel kept popping up. I temporarily plugged the boost bypass line back in and it went away,but it came back on after I pulled the line and drove around a bit. I stopped at a gas station and filled er up and the light went out- temporarily. Car was running fine but the cel light came back on. Well, I changed my plugs to the NGK bkr7e with a .0032 gap and - go figure. Cel goes out and hasn't come back on (knock on plastic). Anyone got an idea what's going on?

[Badanthony]

Oh, forgot to mention - with the bkr7e plugs I saw 18 lbs. of boost on a couple of occasions - never saw more than 16 with the stockers which I gapped at .0028 as per the instructions.

[playboy]

i could be wrong but i could sware i read they were supposed to be gapped to .028 not .0028 i hope you get it figured out sucks for you to my knowledge you're the first with any problems from this kit

[Badanthony]

they're gapped right I just wrote it wrong - Doh! No cels since changing to the colder plug though. Still don't know if I have the boost bypass hooked up right after reading another thread, so if anyone with the psi kit can tell me whether I'm supposed to plug the solenoid, or put the hose back on I'd sure appreciate an answer.

[ExHondaMan]

Pull off the vacuum line off at the supercharger that was the yellow arrow pointing at it... Plug the end of it with a screw or something suitable so that no air can pass through it.... If your still having a CEL after that then check your wiring.

[ExHondaMan]

Heres a pic of what I did with mine and another pic of how I routed it.

[Badanthony]

Got it - a pix is worth a thousand words -mucho thanx!

[LoungeLizard]

I took off the line compleatly and pluged both ends. No problems.

[ExHondaMan]

What did you use to plug ? Can you just go to the dealer and get a couple vacuum plugs ?

[ArrivalBlueSS]

you have to plug a vacuum line for the kit install ?