Supercharger pullies ...

[jmc007]

... from stock to 2.4" !

http://www.pulleyboys.com/cobalt-ion.html

[clevelander2002]

Originally Posted by jmc007

... from stock to 2.4" !

= BOOM!!! and then a lot of

[riz906]

lol that sounds ?


not good .

[Skyscreamer]

So wait, is 2.4" a good thing or a bad thing? and I'm guessing that if they make the pulley they would also make a proper size belt to go on? I hear the guys with the 3" pulley are having problems with the belt slipping off...
~skyscreamer

[selfinfliction]

who all has had a problem with the 3" pulley making the belt slip off?

[Skyscreamer]

I'm not sure exactly who all, I know a guy here in Edmonton, who I am not sure if he's on the forums or not, has a 3" and said that they didn't make a proper size belt and his kept slipping off when he'd really lay on the gas cuz the belt was a lil too big.
~skyscreamer

[rlinbatonrouge]

If you are going for a 2.4 pulley, just remove the pulley completly and put the belt on the snout of the s/c. You should get about the same results, like some smoke and a few loud noises.

[pclear9061]

[clevelander2002]

Originally Posted by Skyscreamer

I'm not sure exactly who all, I know a guy here in Edmonton, who I am not sure if he's on the forums or not, has a 3" and said that they didn't make a proper size belt and his kept slipping off when he'd really lay on the gas cuz the belt was a lil too big.
~skyscreamer

I've been running a 3.1 and now a 3" pulley and it never slips. Maybe that guy didnt press on his pulley far enough and the pulleys are not aligned.

[mailmars]

Originally Posted by jmc007

... from stock to 2.4" !

http://www.pulleyboys.com/cobalt-ion.html

Here is the address for magnuson so that you can get that bad boy rebuilt:

Magnuson Products, Inc.
1990 Knoll Drive
Ventura, CA 93003
(805) 642-8833- Phone

Mark