Air fuel ratio controller for LSJ !

[jmc007]

http://cgi.ebay.com/ebaymotors/AFC-F...12439858QQrdZ1

Also look on the following web site, the manufacturer of the Mini AFC 2.2 (go on the support section, install instruction, engine electronics, afc 2.2).

http://www.easyperformance.com/

I talk to the seller. They did some testing on a Ion Redline, but no dyno results yet. They will probably have some test results (done on a Cobalt SS with a 2.8 pulley) within a week or so. EvilcobaltSS (on cobaltss.com forum) is the man who is testing the unit on his SS/SC. Hoping he will give us some results soon ...

Since I don't know if the stock injectors are already at their maximum flow at WOT with a smaller supercharger pulley, I cannot be sure if the Mini AFC will get the job done. Even with the PSI-FI kit, I have whitnessed some lean condition at WOT on a Cobalt SS with a wideband sensor.

[zfactor]

the injectors are reaching thier max limits even with the psi-fi kit..... i wouldnt try to richen them up to much without getting bigger ones

[AlphaJaguar5]

What would happen if one were to buy bigger injectors and get that? Wouldn't that thing make our car into a stage 1?

[AlphaJaguar5]

Who is going to get this? I don't have the tools to install a new set of injectors to test this myself although I want to try it so bad.

[zfactor]

sorta kinda but not really alpha. im sure there will be more involved in the tuning of the ecu with the injectors for the stage 1 kit than just a afc....

[AlphaJaguar5]

Well isnt that only what psi-fi did?

[zfactor]

im not sure as i have not played with the kit yet since i have been holding out for more power.... but i think they have more into it than this thing not sure i would even trust that thing and dont forget the smaller pulley with the psi kit

[AlphaJaguar5]

Well what I was thinking of doing was to get 50lb injectors and a 3" pulley and that AFC and see what happens but I really dont want to do anything that will hurt my car cuz I need it for school/work etc.

[zfactor]

i would be leary of the ebay part then till its tested... i would tell them you want proff it works and works good, ask to see sheets and thier test results etc.... not just an ebay auction...

[AlphaJaguar5]

lol your the business guy make some calls and try and have them give you a test one