Getting rid of the P1182 DTC?

[JPK]

I have to reset it with my interceptor EVERYTIME I drive my car. It's really fucking annoying now, plus, when I have to get my car inspected next year, It will not pass with any DTC's appearing.

I started getting this code with a smaller pulley (3.15 and 2.9) and ghetto ram air mod (removing the stock air box). It would also throw the limp mode 0061 code. The 61 is gone because I put a K&N CAI on but the 1182 insists on staying.

Yesterday, I pulled off the throttle body and cleaned it out. I also cleaned the s/c inlet pressure sensor off too. No luck though. Code still pops up everytime.

Any help would be appreciated.

[Sp00ner]

Have you verified that the intake has not popped apart at the 'elbow'? This is what causes it on my car...

[JPK]

Originally Posted by Sp00ner

Have you verified that the intake has not popped apart at the 'elbow'? This is what causes it on my car...

Yeah, I check my intake about twice a week for this. This is not the problem. Thanks for the suggestion though.

[Sp00ner]

Originally Posted by JPK

Yeah, I check my intake about twice a week for this. This is not the problem. Thanks for the suggestion though.

MAF sensor isn't gunked up?

[JPK]

Originally Posted by Sp00ner

MAF sensor isn't gunked up?

Nope.

Here's the deal, back when I still had a warranty on this car, I took it in for this code. They replaced my MAF sensor, SCIP sensor and my throttle body trying to fix it. The next thing they suggested was putting my car back to stock. That wasn't gonna happen. I just need someone with HPT to disable the code, I guess. That's the problem, no one with HPT around me that I know of.

[burnintires]

i have a 3 inch pulley and ghetto ram but havent had any codes i dont get this ?

[Sp00ner]

Originally Posted by burnintires

i have a 3 inch pulley and ghetto ram but havent had any codes i dont get this ?

You don't get this question?

[burnintires]

i dont get why i dont pull codes its been like a month im sure its just a matter of time and my revs dont bounce any omre either like it used to

[wb9dx]

I kept throwing p1182 and it was a dirty throttle body...they cleaned it and it's been fine since.

[JPK]

Originally Posted by wb9dx

I kept throwing p1182 and it was a dirty throttle body...they cleaned it and it's been fine since.

That's what I have heard and, as stated above, I tried that. No luck though.