Missing bolt by motormount?

[Dman23]

So anyways I noticed the other day when I was playing around adjusting my traction bars that there was a bolt missing by the motormount by the tranny underneath the car. Also since I had this installed I have thrown two codes(p0103 & p0104), clutch was slipping from 2nd to 3rd at lunch but was fine when going home, and have experienced a little more motor knock. So I see this bolt missing and figured I better at least make sure it wasn't something important. Here are some pics of said missing bolt.

IMG_00821.JPG

IMG_00851.JPG

IMG_00861.JPG

[SWCRedline]

Hard to tell, but I believe that is a flywheel inspection hole.

[Dman23]

Does that mean when I washed it on sunday with the underspray wash that I am pretty much f'd?

[Dman23]

Oh yeah and it's the bolt closest to the passenger side if that helps

[Ron9919]

Originally Posted by SWCRedline

Hard to tell, but I believe that is a flywheel inspection hole.

i thought the inspection hole was on the top of the trans and it is like a black door?

just went out to look at mine and there is a hole there also!

[Dman23]

Ok so I am not the only one, I seen the marks from a spacer so I knew at sometime there was a bolt there and on top of all the other shit happening right now I thought that might be it......so I take it there is nothing to worry about for this bolt then?

[Ron9919]

i haven't had no problems

[Dman23]

Sweetness thanks Ron at least I am good there, now the clutch, knock and p0103 and 04 is something I have to fig out.