07-28-2008, 02:06 PM
|
#1 (permalink)
|
|
Senior Member
Join Date: Oct 2007
Posts: 112
|
boost
|
ok, i have a 2.8 pulley and a cheap boost gauge. and i was only gettin 10psi stock, and then only 13 with the new pulley. i threw it up to a cheap gauge, after checking all the fittings and makin sure everything was right 2 or 3 times. now that i got my interceptor in its tellin me the same thing. wot through 2nd and 3rd, the highest hit was 13.8, so i ripped eveything apart again last night, and its still the same. i have what sounds like a vaccum leak somewhere around the injectors but for the life of me can find out what it is. there were four of us for about an hour last night tryin to find this leak.
anyone have any ideas?
|
|
|
|
Similar Threads
Linear Mode
