Clutch Pedal Assembly Drawing

[jfelser]

Anyone aware of where I can get a copy of the clutch pedal assembly drawing? I've had it in several times for the same noise and would like to have a picture in hand before I pull it apart myself. Unfortunately, I don't have access to a service or parts manual presently, but I have a bid on Ebay for the GM parts manual for our car. I was hoping to get a picture of the assembly ASAP. Any ideas would be appreciated. Thanks

[crazybrew609]

ok well you asked and here we go

[crazybrew609]

1.Remove the clutch pedal retainer from the front of the clutch pedal assembly.

2. Disconnect the clutch pedal position switch (2) from the clutch bracket

3. Remove the clutch pedal pivot nut

4. Disconnect the clutch master cylinder from the clutch pedal assembly.

5.Remove the clutch bracket to front of dash nuts.

6.Remove the clutch pedal and bracket assembly

7. Remove the clutch pedal pivot bolt (1) and retainer (2).

8. Remove the clutch pedal.

9. Secure the clutch pedal and return spring and remove the clutch pedal pivot bolt.

10. Remove the clutch pedal (3), return spring (2), and pivot bushings (1).

reverse to install

[jfelser]

Thanks for the quick response with a step by step procedure. I should probably be able to do this without an issue. Unfortunately, I'm a visual learner and would feel better if I had an assembly drawing to refer to. Thanks again for your assistance