I Fixed my COLD START Issue!!!!!

[XeroState]

Well it is touching it, I can't tell if it is pushing it down though.

And do I have to adjust both or just one? (I looked today, will be doing it tomorrow..as its too cold for bare hands for awhile...and now there are cars in the garage)

[korax123]

loosen both 10mm and move it up. Then adjust it back down until it just touches the lever...but not putting any pressure on it.

[XeroState]

Alright, I'll do that tomorrow after my study 'date' (if pclear is reading this...shut up)

[Sp00ner]

Any luck Xero?

[tha sikest]

sup spooner long time no see huh, got a new redline on tha way, any new web sites for ideas to make it quicker

[XeroState]

Originally Posted by Sp00ner

Any luck Xero?

Did it, now I must wait for the temp's to drop again. Recently this week it has been starting on the first attempt as it has somewhat warmed up. Also, I think my car was mad at me for a bit giving me a hard time.

[landshark1]

thanks for the help. gq1081 is my brother, and he has been complaining about this. again,... thanks

[XeroState]

IT WORKS...lol (not that I doubted it). I did it on tuesday, this morning was -15C with a windchill of -25Cish and started first try, no apparent problems. I mean apparent as I use a button to start it so I can't tell if it struggles, only if it fails. It faced the horrendous wind for 2 days head on with a mere 10 litres of gas in the tank (want to keep it over half..woops). As it gets colder I'll keep updating you guys.

[korax123]

Sweet now I feel usefull...so was it pushing the lever down at all???

[XeroState]

It was slightly, and I mean VERY slightly pushing it down. It is now just touching it instead.