Whats the gray wire pin 37 for???

[korax123]

Ok coming off the PCM the top one pin 37 is a gray wire. Whats the gray wire for?

It's the only one that isn't soldered together from removing my SMT-6.

If it's really important it may be why I go to limp mode randomly.

So whats it go to?

[NoRemorse]

Originally Posted by korax123

Ok coming off the PCM the top one pin 37 is a gray wire. Whats the gray wire for?

It's the only one that isn't soldered together from removing my SMT-6.

If it's really important it may be why I go to limp mode randomly.

So whats it go to?

Well no shit! I am actually looking at the eco wiring diagrams right now, ill take a look for you

Is it just gray, or does it have a stripe?

[korax123]

After removing the SMT-6 it went to limp mode and threw the p1182. Then got bigger injectors and gm tune and limp mode come when at WOT. maybe related maybe not.

I will clean my TB when i get home before going to the track.

[NoRemorse]

well, from what I have, it may be:

37   AU     6337                     0.5    TXL    GY        &LSJ           Manifold Absolute Pressure Sensor #2 Signal

[TheWastedYears]

P1182 won't cause limp mode. Was that the only code?

[Sp00ner]

That would do it alright... but it should still toss the P0068 if the MAP signal was wrong...

[Sp00ner]

Originally Posted by NoRemorse

well, from what I have, it may be:

37   AU     6337                     0.5    TXL    GY        &LSJ           Manifold Absolute Pressure Sensor #2 Signal

WTF??? Where did this odd setup come from? The scroll bar...

[korax123]

if that gray wire is for
Manifold Absolute Pressure Sensor #2 Signal
thats what the P1182 code is......so i need a freaking soldering iron or a better way of putting the wire together.

oops i was close its this
P1182 Supercharger Inlet Pressure Sensor Performance ECM

[Sp00ner]

P1182 is the supercharger inlet pressure sensor code... that's the lil sensor on the blower....

[NoRemorse]

Originally Posted by Sp00ner

WTF??? Where did this odd setup come from? The scroll bar...

lol, sorry, I use the 'code' command sometimes for formatted text to keep spacing even, but I guess it didn't matter here with only one line. oops!