Siemend/DEKA Injector data

[NoRemorse]

Trying to piece together some info on these. currently I have:

Tech drawing (pointless really):
http://www.mototron.com/include/INJ-GAS-006.pdf

From SiemensVDO:


Pressure: 600 kPa
Qs: 10.8 g/s



3rd party:

Static Flow Rate: 60 lb/hr @ 43.5PSI (300kPa) = 630cc/hr (sold as 65lb/hr by some vendors)
Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Gain: 0.11ms/mg, Offset: 0.055ms, Turn on time: 1.14ms @ 14VDC, Turn off time: 0.85ms @ 600KPa
Acceptable Factory Flow Tollerance: +/-5% (10% window)

[nduchene]

You must have been talking to Dan recently...

I actually emailed LFP to see if they can fax/email me the spec sheet for these earlier this morning.

[NoRemorse]

Originally Posted by nduchene

You must have been talking to Dan recently...

I actually emailed LFP to see if they can fax/email me the spec sheet for these earlier this morning.

I just e-mailed them (from my GM account) asking for data sheets. We will see....

[NoRemorse]

Got a call from Siemens today (They actually have me as a priority right now because I gave him my GM e-mail address as contact info, I shit you not, he told me this)

Anyways, they are going to get me every bit of flow data they can on these injectors.

While I am on this spree, anything else we need to get data sheets on?

[fullthrottle]

Originally Posted by NoRemorse

Got a call from Siemens today (They actually have me as a priority right now because I gave him my GM e-mail address as contact info, I shit you not, he told me this)

Anyways, they are going to get me every bit of flow data they can on these injectors.

While I am on this spree, anything else we need to get data sheets on?

HERE LETS PLAY A GAME LETS SEE IF ITS BECAUSE OF YOUR gm ACCOUNT OR IF THEY GIVE IT OUT TO EVERYONE. give me the address and lets see if they send me the same info.

[NoRemorse]

Originally Posted by fullthrottle

HERE LETS PLAY A GAME LETS SEE IF ITS BECAUSE OF YOUR gm ACCOUNT OR IF THEY GIVE IT OUT TO EVERYONE. give me the address and lets see if they send me the same info.

I am sure anyone can get the info, but the guy I talked to said that he would get right on it becuase I am working on a project for GM . I didn't say it, he did. The company is based out of germany, so it's not paticualarly easy for them to get all the data together.

I sent them a request through OEM Manufacturers. I am not saying the infor can't be had by anyone, just that he said that it gave the issue some priority.

I am just telling you what I was told... And I just let him keep assuming I needed this pronto for a project I am working on.

[RL-2005]

Originally Posted by NoRemorse

Got a call from Siemens today (They actually have me as a priority right now because I gave him my GM e-mail address as contact info, I shit you not, he told me this)

Anyways, they are going to get me every bit of flow data they can on these injectors.

While I am on this spree, anything else we need to get data sheets on?

specs on the intercooler pump would be nice

[NoRemorse]

Originally Posted by RL-2005

specs on the intercooler pump would be nice

like what? iirc it's 7gpm... not much more TO know about it, lol.

[RL-2005]

well, there you go, that was easy

[AlphaJaguar5]

NR You ever get an email back?