Saturn Boost Guage: Charts and Instructions from Wop and Others

[Signals]

Originally Posted by Sp00ner

It's pretty much the same size, and molded into the console. That's pretty clean, yours has mounting hardware in plain view, and it looks like there's adhesive holding it down... I'm not saying it looks bad, but the stock one is about as clean as you can get... like I said. It's subjective...

Here's some pics of the stock boost gauge unit. Very clean in my opinion. It replaces the entire top cover of the steering column. On the rear are some adjustment dials and you can also see where the factory harnesses connect.

[WopOnTour]

Guys
THE FACTORY HARNESS IS NOT AN ISSUE!!
<UPDATE>
BUT
AT THIS TIME
The factory BOOST GAGE WILL NOT WORK in the 04's , THE LADDER TACH WORKS FINE

The only "trick" is running a pair of wires to the ECM and adding them to the ECM connectors into currently empty cavities (boost out/staged shift rpm). All the boost gage requires then is B+ (switched) GND and a connection to the IP dimmer.If someone has purchased this gage they can PM me for wiring details and the terminal part numbers and locations to connect to the ECM.
BUT
What has yet to be determined is whether the 04 ECM is outputting these signals to the gage. UPDATE TACH YES- BOOST NO - STILL LOOKING FOR A WORK AROUND AS OF 6/20/05
WOT
http://www.redlineforums.com/forums/...9200#post49200

[mailmars]

Here are a couple of questions from us sad sacks that do not have access to gm teck line...

1) for the "05" non comp, is the wiring harness complete or would you need to make connector changes to C1 and C3?

2) for the "05" is the wiring harness complete for the fog lights? If so, is there a BCM
flash or is one even needed for the fog circuits?


Thanks,

Mark

P.S. headed for the dealer this PM to pony up for the gauge assbly....

[max_boost]

Originally Posted by mailmars

Here are a couple of questions from us sad sacks that do not have access to gm teck line...

1) for the "05" non comp, is the wiring harness complete or would you need to make connector changes to C1 and C3?

2) for the "05" is the wiring harness complete for the fog lights? If so, is there a BCM
flash or is one even needed for the fog circuits?


Thanks,

Mark

P.S. headed for the dealer this PM to pony up for the gauge assbly....

No the wiring harness isn't complete. You will have to run the wires for the boost gauge/tach lights yourself. I have no clue about he fog lights.

[WopOnTour]

Originally Posted by Sp00ner

I'm not saying it looks bad, but you were talking about 'clean' looks. Neither of them is really a clean look, but the stock one is cleaner. That's all!

Maybe? Interesting... maybe it's in "bar" like most European gages.
ANYONE SEEN A COMPETITION PACKAGE CAR IN CANADA??
WOT

PS> Here's the latest PDA GUAGES HELP FILES
*Thanks to all that have contributed

[Sp00ner]

PLease god help me clean up the boost gauge install thread guys. I'm gonna make this the new sticky... someone make sure I don't forget anything. This is gonna take a few days, but that old thread is insane...