Still trying to get ahold of paul. I was doing some more reading in the spreadsheet and realized that the vlotage offset they have listed is for a table found in older v6 cars.
Our volt modifier will work set at 2 and the flow rate table scaled down to 50%
all that is left is the offset-vs-volts-vs-vac table.
I tried applying a filter to the closest one that they have to see if i could find a pattern and interpolate it out to -120 but didn't have any luck.
One other thing, they say its pretty important to use the pulse adders / min pw data supplied. These injectors allegedly run super smooth as long as all the data is as correct as possible.
NICE sig eric. You got me