Need fe5 struts and endlink help!!?

[lilhomieb07]

Getting fe5 struts and endlinks but......i need to know what endlinks to get on the redline. The sway bar is different and control arms are different and ive seen they have 2 different size endlinks. Rockauto has everything. Theres a 9.6" endlink and 11.2" endlink, i need to know what moog endlink i need for the fe5 struts on the redline swaybar and control arm?

[Vyperpunk]

Can't go wrong with the adjustable Powergrid endlinks.

[lilhomieb07]

Hellllla expensive tho....


id really like a bump cuz i need to know what endlinks to get with the 08+ cobalt fe5 struts on the redline swaybar. Im looking at the Moog k80252 but i wanna know if any of the fe5 endlinks will mount up with no troubles.

[05RedLinin]

Buy both then return the ones that don't work

[lqh2552]

I have the FE5 Moog endlinks installed with no issues. But because they are shorter than the FE3 endlinks, the sway bar ends up sitting pretty close to the tie rod arms. We're talking about less than an inch at normal ride height. But I don't think they ever contact with each other as I don't hear anything out of the ordinary nor do I see any damage on any of the components.

[BULLIT]

Go with the shorter ones. Its what I did. Enjoy you fe5's great shock

[lilhomieb07]

Well if the fe5 struts are a direct fit then ill need the same height endlinks to mount then which means the longer one. My buddy just did the fe5 struts and has stock endlinks and they fit perfectly which means that ill need the longer Moogs endlinks then.

Ive established fe5 struts, moog k80252 endlinks, moog lca bushings. I already have the fe5 rear shocks and the top hats with bearings bout 5k on both then will be using my progress springs. All i know id my entire front end has alot of play and clunks soooo loud.

[lqh2552]

Well, in case anyone was curious, here's a picture of the FE5 Moog endlinks. They're a bit shorter, so the sway bar ends up being pretty close to the tie rod.

[lilhomieb07]

I ordered some 08+ ss/tc fe5 struts, moog k80252 endlinks, and moog lca bushings. Be here next week then i can install them hopefulyl get rid of the bad clunk anbd add some stiffness!!!

[ION GONE]

Yeah brant, the bad endlinks make a whole lot of noise. When I changed mine, it all went away. I went w/ the Powergrid endlinks just because I don't want to mess w/ it for a while. You'll love the fe5 set up.