|Topic Review (Newest First)|
|05-29-2013 11:43 AM|
|bluesat||Does anyone know what the pink wire is in the kick panel?|
|08-14-2012 01:22 PM|
|TimTyrant||I am using the Scoshe provided terminal adapter. It has two larger holes and one smaller hole and the one for the large battery cable doesn't seem to grip the wire very well.|
|08-13-2012 09:35 PM|
What are you using to grip to the wires?
|08-10-2012 01:04 AM|
The connecter I got for the power cable and battery cable doesn't really grip onto the battery cable, is there something I can get to help hold it in place.
|07-30-2012 11:33 PM|
Well, being that I did not replace the head unit I had to get a converter
But I got it all hooked up and on.
|07-28-2012 11:15 AM|
Do you have the advanced audio in your car? If so you can tap into the remote wire at the amp. If not, the easiest way (at least with removing the least amount of stuff) is running it up to the radio and connecting to the blue wire going off your deck. You'll have to run the RCA cables up that way anyhow.
Edit: I should clarify I was assuming you were talking the remote power wire. If you mean something else I'm not understanding what you're asking.
|07-28-2012 12:52 AM|
So the remote wire has to be fed through to the front pasanger side?
I am trying to install a sub, amp and cap for the first time. Could I just solder the converter to the speaker from the trunk?
|05-20-2012 09:07 PM|
|THE WESCALINE PROJECT||I have done this in a couple of my previous cars that did not have head units, and also in my previous Redline. Do you have any kind of problems getting the audio adjusted right? It seems hard to separate the frequency ranges and such|
|11-30-2011 01:42 AM|
|SIRedline1104||I just bought my 04 Redline on 11/29/11 & i have a system im gonna put in mine when i get time but i have 2 12' Kicker L5s w/an AudioQue 1200 watt amp & 5 Farad Cap.. Just tryin to decided wether or not to get an aftermarket deck or just tie in with a converter ?|
|11-08-2011 07:56 PM|
|bluesat||good write up. will be doing this soon just running the wires for rca on the bootom.|
|This tutorial has more than 10 replies. Click here to review the whole tutorial.|