Saturn ION RedLine Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Problems & Troubleshooting
    Hello everyone, I recently bought a 2nd redline(2004) after my 2005 got totaled by an uninsured driver(still have as parts car) I have been driving the 04 and it has been very hard to shift into any gear especially 1/2 and it would grind going into reverse, I think the clutch wasn’t fully...
  2. Buy/Sell Parts
    Hello all, I am selling a LSJ CLUTCH UPGRADE KIT from ZZP (original price $415.99) aswell as a ZZP ALUMINUM FLYWHEEL-2.0L F35 (original price $289.99) I bought both of these a while ago but ended up selling my redline and getting an S2000 so I never installed them onto the car, both of these...
    $500 USD
  3. Problems & Troubleshooting
    My clutch pedal engages very low, would this be a slave, master, or clutch issue? My fluid is not low.
  4. Problems & Troubleshooting
    Ok guys…. I bought my 05 ion redline 13 years ago and a couple years later I lost my license for 9 years due to racing. Got my license back a few years ago but finally put my redline back on the road in March 2021. I’m chasing a clutch issue and hoping someone can help. My clutch is fully...
  5. Problems & Troubleshooting
    I bent the rod of my master cylinder back in August after it popped out of the pedal and had to clutchless shift it 3 miles in town to get it home. After I replaced the master cylinder and bled it using a vacuum pump, the pedal has almost no resistance and the clutch still isn't disengaging. I'm...
  6. Problems & Troubleshooting
    Ok so I installed a heavyduty organic friction plate my car makes around 300hp 250ftlbs of torque it was fine at first and all the sudden It’s been hard to shift and won’t go in reverse without grinding it’s a brand new clutch kit and there is no air in the system I’m wondering if is frayed...
  7. Problems & Troubleshooting
    Hi all, I have a 2004 Ion Redline. Driving to work today, went to engage my clutch pedal, lost all pressure. Dropped to floor and engine died. Started and limped it to a parking spot, pumped clutch pedal a few times and the pressure came back. Reservoir was full, no fluid leak as far as I can...
  8. Problems & Troubleshooting
    Hey guys so I'm not sure what the problem is but lets say I'm at a stop light and I do a take off with slipping the clutch a little bit to get traction when I shift into second and step back on the gas sometimes it's like its in neutral cause the rpms jump but I'm really in second. I know it...
  9. Buy/Sell Parts
    I have a 2006 saturn ion QC with a 2.2l manual transmission f23 I believe. I am looking for a pressure plate and clutch. I don't care what stage it is. I just badly need them for the right price. Pm me what u have and what u want for it. In desperate DESPERATE need here guys.
  10. General Discussions
    ok so im new to the ion, only had it for a year now. since then some things have come up. i have a 07 redline and heres my first problem. when i come up to a stop and i slow down, the rpms go all the way down to about 200 and jump up to 1k, itll do this alot too, like 4 to 5 times before it...
  11. Problems & Troubleshooting
    Yesterday morning I went to start my car before work and when I went to push the clutch in, it had no pressure at all and went to the floor with ease. It started but wouldn't go into gear without grinding, so i shut the car off and haven't been able to look at it since and wanted someone elses...
  12. Problems & Troubleshooting
    So I left my RL sitting for a couple of days because I had plenty of errands and decided to take my more fuel effecient 03 Quadcoupe. I drove off in the RL yesterday everything seemed fine, as I came to a redlight i was in 4rth and decided to let the revs come down. Thats when it happened, a...
  13. Problems & Troubleshooting
    Hey guys. Right now, don't tell me use the search button because I did and found nothing! Lol. Now, when I push the clutch in, outside of the car, I can hear something squeaking?? I'm positive that I can't hear anything squeaking inside the car. I rolled the window down and heard something...
  14. Performance Modifications
    Ok some of you know what happened...if not search for it....I had a coolant issue. Got my block back from bates 2 weeks ago, have all the build parts just waiting on my head to be finished and everything will be done. So ive started putting the bottom end together for now... Any comments...
  15. Problems & Troubleshooting
    Hello everyone, New to the forums. 2004 Silver Saturn Ion Redline. I'm wondering if anyone has an estimate or rough price I should expect on replacing the synchro ring for 5th gear. The clutch won't stay in. Big question is whether they can do it with the tranny in the vehicle still or if they...
  16. Problems & Troubleshooting
    74k Miles. 2004 IRL Daily Driven Year Round. Madison Wisconsin. Mechanically she is all stock as far as I am aware. Lately my clutch pedal has engaging closer and closer to the floor. Today however when I went to go get it picked up from the window tinter she went completely to the floor...
  17. Problems & Troubleshooting
    This is on the 2005 Redline - 125K all stock. I just got the (first) clutch replaced (OEM parts: disc, pressure plate, fly-wheel, etc) by Saturn Cerritos Yikes!!! WTF with the $1400+ labors? Before replacement, I got a little bit of clutch slip from 1 - 2 and 2-3. When I say slip, I mean the...
  18. General Discussions
    Comes with clutch, pressure plate, Throwout bearing, msrp 325$ anyone else have it? I will have it in soon. Its orderd.
  19. Problems & Troubleshooting
    Didn't find this question posted... so here we go: I just got my Spec Stage 2+ clutch, light weight flywheel, throwout bearing installed today at the dealership. I know for a fact that it's bled perfectly and there's no air in the system. To start the car/shift from gear to gear, the clutch...
  20. Problems & Troubleshooting
    I ordered my clutch kit and flywheel combo from Gravana Tuning about 3 weeks ago and just recieved it today only to find out that a throwout bearing was not inside. I'm curious to find out whether or not this is normal or a mistake. Did anyone who purchased the SPEC Stage 2+ kit recieve a new...
1-20 of 21 Results
Top