Saturn ION RedLine Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
Hey all been lurking for a bit and decided to sign up and ask you folks for some help, go easy on me definitely a newbie haha

Ive potential found a clean 04 Ion redline
Has about 72000 miles

The cars pretty much stock other then a cold air intake and recently a new header and exhaust from SRS tuning

He says the light came on after he put the exhaust in
His first thought was because the 02 sensor wouldnt reach so he extended it
he also cleaned the maf it went out but came back on( probly after a battery reset I'm assuming )

Now he says it's fixed been off a few days he took it to a mechanic who adjusted the computer for a the change

Can this be done with the stock computer ?

I read on another thread about disabling engine codes

I've also read people used defouler rings at the o2 sensor

Any tips or help would be great guys thx


Sent from my SM-G960W using Tapatalk
 

·
Registered
Joined
·
12 Posts
Same thing happened to mine. Cel after Flowmaster install. P0069 if I recall. Never went limp, nothing I did fixed it, buddy with a sc cobalt had same issue. Sounds like a believable tale to me
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Same thing happened to mine. Cel after Flowmaster install. P0069 if I recall. Never went limp, nothing I did fixed it, buddy with a sc cobalt had same issue. Sounds like a believable tale to me
How did you fix it

Sent from my SM-G981W using Tapatalk
 

·
Registered
Joined
·
27 Posts
Do you have emissions inspection? If so you need to make sure the required onboard monitors are complete before the light comes on, or it won't pass.
 
1 - 5 of 5 Posts
Top