Saturn ION RedLine Forums banner

1 - 20 of 90 Posts

·
Registered
Joined
·
3,140 Posts
Discussion Starter #1 (Edited)
well, since the wait on the K&N and AEM intakes will be a while, i decided to talk to a close friend of mine who runs a local shop. he said we could fabricate an intake, and get them powdercoated WELL before 3 months is up.

i'm just in here gauging interest. the intakes will have been dyno proven before they even get mass produced, because if some reason they don't gain any power (highly unlikely), then he won't sell them.

if you're interested, please post here because i gave him the website and he's going to check it out sometime today or tommorow.

price as of now is undetermined as we haven't gotten down to making it, and won't if there is no interest.

he said i'd probably need to get 10 people in on it for sure, and then if any others are interested, we'll just make more as needed. if we can get more, say 15 or 20, i'm pretty sure he'll do a price cut on them for us.

please only post here if you are really interested in a CAI.

BTW - we're going to test a CAI and SRI, and whichever makes the best powerband, is the one we'll stick with, as it's pointless to make the CAI if the SRI works better.

List so far of those who have shown interest:
vita
loumoll
xtremesc2
Redlinekid_04
brother 1
brother 2
father
linenoyz (only one right, for KatieMarie (?))
re1080
goofyguy
LoungeLizard
JPK
SilverBulletRL
shaneathan
Tom01SC2
BlackLine
omega 13
new2boost
HersheyRedLine
SatredL
cyrix
BlackRedline04
IERedLine
2004redline
BellsRL
Justin
dL_RL
Aeain
johnboy8221
amishland
blue_arcade

so we're at 31, including myself (think i'm getting them made for you all without getting myself one :p )
 

·
Registered
Joined
·
786 Posts
I'm in as long as there's a shield between the tranny and the filter.
 

·
Registered
Joined
·
3,140 Posts
Discussion Starter #3
that's a good point, i'll make sure to talk to him about addressing that. i don't see it being much of a problem
 

·
Registered
Joined
·
609 Posts
My father, 2 brothers and I are all in. If its a better product than the speculations of aem or K&n then y the hell not?? If he can get 10 ponies out of it then im in hands down. :D
 

·
Registered
Joined
·
168 Posts
i would been in too depending on how much its gonna cost
 

·
Premium Member
Joined
·
3,231 Posts
Im in and that should be your 10.
 

·
Registered
Joined
·
786 Posts
Okay, we have more than 10. So I'll ask the question everyone wants to know.

When will they ship? (LOL)

Seriously, let's move on this. It seems the only way we're going to make these aftermaket products happen is if we start them ourselves. If we make this happen and we get our headers, that should keep us happy into spring at least.

Good job Vita!!!
 

·
Registered
Joined
·
1,135 Posts
Patience man!! haha....or at least SOME ;)




and even if we get our intakes and headers, that wont keep us happy for more than a few weeks till we get bored with the extra power and need more, u know that, hehe.
 

·
Premium Member
Joined
·
3,231 Posts
i think 250 at the wheels and everyone will be using the money to save for the information I found about the LSD. Its hard enough to get the 205+ to the pavement.
 

·
Registered
Joined
·
3,574 Posts
loumoll said:
Okay, we have more than 10. So I'll ask the question everyone wants to know.

When will they ship? (LOL)

Seriously, let's move on this. It seems the only way we're going to make these aftermaket products happen is if we start them ourselves. If we make this happen and we get our headers, that should keep us happy into spring at least.

Good job Vita!!!



Amen to this post, man.
 

·
Registered
Joined
·
617 Posts
I'm in 4 sure :)
 

·
Registered
Joined
·
524 Posts
I'd be in as long as it is dyno proven and doesn't look like a hack job. Also, I'd prefer a WAI. I'm not going the CAI route again unless the HP speaks for itself...

Tom
 

·
Registered
Joined
·
391 Posts
count me in also with the right power and price...
 

·
Registered
Joined
·
3,140 Posts
Discussion Starter #19
so we're at 16 right now, check the first post for a list of interest shown, if you're already up there, try not to say you're in AGAIN, lets try and keep this thread to a minimum, unless you have specific comments.

again, this will be dyno proven, powdercoated, and look nice with silicon connectors and all, equal to AEM quality, or i won't do it, sad to say i'm not here to make money off you guys, just get some stuff developed.

spread the word, the more we can get in on this, im sure i can get him to slim up his profit margins that extra bit more
 
1 - 20 of 90 Posts
Top