Saturn ION RedLine Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
31 Posts
not sure what your engine or block looks like but this is how i did it on my SI

near the oil filter is the stock location for the oil pressure sensor



rip off your stock one and install a T fitting and screw in the aftermarket pressure sensor, and your stock one.


and make sure its out of the way of anything like the filter



then run the line into the cab.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top