[gm3saturn]

Okay, so Im swapping my pulley out and Im running into some problems. I cant get the bolt from the tensioner back into place. I can move the tensioner but I cant get the damn hole lined up. Its like the tensioner wont condence enough to get the bolt in. HELP PLEASE

 

[clownhair]

Okay, so Im swapping my pulley out and Im running into some problems. I cant get the bolt from the tensioner back into place. I can move the tensioner but I cant get the damn hole lined up. Its like the tensioner wont condence enough to get the bolt in. HELP PLEASE

you didn't need to take the tensioner bolt off, you can press down really hard on the tensioner pulley and it will release the tension. Wedge something in there and see if you can push it down enough to get your bolt back in.

 

[gm3saturn]

It took some work but its on now.