Saturn ION RedLine Forums banner
1 - 20 of 25 Posts

·
Registered
Joined
·
366 Posts
Discussion Starter · #1 ·
hey everyone, i just dynoed today. we had high humidity, i don't know if it matters for dynoing. but it was at 81%. and it was 78 degrees.

anyway my numbers were 192whp and 182wtq. my scanner don't like windows xp so i'll try to get it posted
 

·
Registered
Joined
·
366 Posts
Discussion Starter · #3 ·
once in 3rd and once in 4th. i only have 1,100 miles.
 

·
Superd00d
Joined
·
22,040 Posts
There's an interesting thought... I wonder what the milage charted against the horsepower would look like. The more I'm thinking about it, the more it seems the people that have a few grand on the clock are making over 200, and the new cars are hitting mid 190's... I don't think that would suprise anyone, but I wonder if it's actually consistent.
 

·
Registered
Joined
·
366 Posts
Discussion Starter · #5 ·
every GM i've owned dynoed MORE power after 10,000 miles when i went back. and that's why i said i have only 1,100 miles.

here are my cars i've done it in: '02 Ecotec Cavalier, and '02 Z28 LS1 M6
 

·
Superd00d
Joined
·
22,040 Posts
Raven said:
every GM i've owned dynoed MORE power after 10,000 miles when i went back. and that's why i said i have only 1,100 miles.

here are my cars i've done it in: '02 Ecotec Cavalier, and '02 Z28 LS1 M6
I hear that alot, I'm just curious to see the numbers... I think there's enough info around here to almost do it.
 

·
Registered
Joined
·
384 Posts
got dynoed

Raven said:
dynojet dyno
I just go my 2004 rl dynoed(dynojet) :D and the figures are

202.7/184.5
204.4/184.4
Temp in the shop was 83 degrees with 42% humidity

I had the scdyne header installed. I don't have any pre-header runs. I just
found this shop about 1 hour from my house.

So i've got approx 205 hp at the wheels.. I hear a K&n in the mail

This was a 4th gear run from 40mph to 6500rpm cutoff
 

·
Registered
Joined
·
4,965 Posts
For a fourth gear pull, that seems pretty impressive. I think Vita dynoed with a fourth gear pull and only had somethin like 188WHP and I forget how much torque. Nice pulls.
 

·
Registered
Joined
·
384 Posts
How do most shops do dyno's? He didn't ask--just went about his business?
 

·
Registered
Joined
·
384 Posts
How are these guts posting 210 to 219 hp in the forums??
 

·
Registered
Joined
·
384 Posts
I am trying to get the chart emailed for clarity--will post picture if readable

pics are bad but readable--Hope to get clear one in email tonight. later.
 

Attachments

·
Registered
Joined
·
115 Posts
Raven Was that at Elite? Cuase when I'm done with my pulley I'm going back to get it dyno'ed again
 

·
Registered
Joined
·
384 Posts
here's the clear chart

redline said:
I am trying to get the chart emailed for clarity--will post picture if readable

pics are bad but readable--Hope to get clear one in email tonight. later.
The clear chart is attached
 

Attachments

·
Registered
Joined
·
366 Posts
Discussion Starter · #16 ·
Draxxus said:
Raven Was that at Elite? Cuase when I'm done with my pulley I'm going back to get it dyno'ed again
yep. but it was 82% humidity. i'll go again when it's dry
 

·
Registered
Joined
·
365 Posts
Generally, how much do dyno's run for a test?
 

·
Registered
Joined
·
3,140 Posts
Blue04RedLine said:
For a fourth gear pull, that seems pretty impressive. I think Vita dynoed with a fourth gear pull and only had somethin like 188WHP and I forget how much torque. Nice pulls.
yeah, it was right around there with the airbox removed (with K&N filter) on a mustang dyno, bone stock was 179-180 best
 
1 - 20 of 25 Posts
Top