Saturn ION RedLine Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
103 Posts
I think he replaced the cat and removed the post-cat O2 only, so that's probably why the pre-cat O2 is still fine. :)

You'll have to find a multimeter and a sensor sim with the right heater resistance. I'm sure WOT's right when he says ~20Ohms. Just keep trying different ones I guess....? The other option is to just buy a 20Ohm resistor and splice it in yourself. It'll need to be a bigass power resistor though, 10W for sure, probably a 20W to be safe. You can probably get one for 10 bux at DigiKey....
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top