[SFPH]

Like the title mentions, we now have the NGK BKR7E Copper Tipped Sparkplugs , that are one range colder than stock and require gapping them at exactly .035 for running a DUB 3.25" Pulley Unit or smaller Supercharger Pulley. Hope this helps, as check them out here:

http://www.southfloridapulleyhq.com/SFPH/rl_csss/ec_ngk.htm

 

[Redline686]

Would it be horrible to use those plugs before you get the pulley, like to just set up everything before you add the pulley or should you wait until you have a smalled pulley to install them?

 

[navymitch12]

14.95 for 4 or 1, i will assume 1 because that is cheap for all 4

will there be any deal if you buy the pully and 4 plugs?

 

[SFPH]

Would it be horrible to use those plugs before you get the pulley, like to just set up everything before you add the pulley or should you wait until you have a smalled pulley to install them?

Redline686, you are fine with the stock sparkplugs until you decide to install the pulley. Until then, I would stick to the stockers. Hope this helps.

 

[max_boost]

14.95 for 4 or 1, i will assume 1 because that is cheap for all 4

will there be any deal if you buy the pully and 4 plugs?

$14.95 for one?? Where the hell do you buy your spark plugs.

 

[navymitch12]

yea that got worded wrong

i am tired leave me alone

 

[riz906]

i put thoses in without runs good nothing diffrent than stock...

but was wordering gettin the 3.00 pulley 4 pound increase do i have to change to a

lower spark plug like a bkre5 or somthing ? and maybe get somthing for more fuel ?

 

[navymitch12]

4lbs that is 16psi how u gonna get around the whole PCM thing, do you know something i dont, o and did you find a belt that works because from all of what i have heard those double sided belts are HARD to come by