Saturn ION RedLine Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter · #1 ·
I've done some grill work to my RL, but I need some help from anyone who's done to rear bumper. I need to find a way to secure it to the backing, without it looking ghetto! I know some of us have done this, I just need a little advice. Pics would be great, too. I'll try and post some of my own, soon. C'mon, guys...help a brother out!!
 

·
Registered
Joined
·
4,352 Posts
just use some body shop grade epoxy. sand the inside area a little clean it with either de-natured alcohol or laquer thinner wait for it to fully dry then use the glue man it will work great do overdo it either you dont need a lot. just make sure to get in over a lot of the " holes " in the mesh theis way its on there good i put this stuff on all the time for the civic crowd and never had a problem with it this way
 

·
Registered
Joined
·
4,352 Posts
open the phone book and look under autobody and look for supplies any of them should be able to help you as long as they sell to the public
 
1 - 7 of 7 Posts
Top